Jump to content
SAU Community

Recommended Posts

So I've recently moved to Revesby from the St George area, and using the M5 from the River Rd Revesby it took precisely 1 hour and 40 minutes to get to work, which is f**king ridiculous compared to the 40-50 min drive it usually takes me. I'm going to try Centenary Dr tomorrow but I think its going to be shitfight as well. Anyone know any handy shortcuts to bypass the major roads (carparks)? I need to be at work by 8am.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/332385-revesby-to-lane-cove/
Share on other sites

Used to live in Penshurst and drive to Lane Cove once a week.

Way I used to go was down King Georges/Centenary Drive/Church St and then take the exit and turn right when you hit Victoria Road.

Keep going all the way down and take the exit to Lane Cove when you get to the Gladesville Bridge.

From Victoria Road onwards it was a pretty sweet run especially at that time in the morning, it used to take me about an hour.

Nah nowhere near there. If you're going up Homebush Bay Drive, you go straight over Parramatta Road. You need to keep going past Rhodes, past the bridge on Concord Road/Church St and then just before you reach Top Ryde there is an overpass for Victoria Rd where you have to take the exit on the left and then turn right onto Victoria Road.

From Revesby I guess you have to take Stacey St and then go down Liverpool Road to get to King Georges Rd first.

Ok, so I'm really bored at work...

Here you go:-

Driving directions to Lane Cove NSW

29.3 km – about 58 mins

Via Chapel Rd Sth, Church St, Victoria Rd - remove all

Revesby NSW

1. Head north on The River Road towards Flood Ave

1.5 km

2. Turn right at Canterbury Rd

900 m

3. Slight left at Chapel Rd Sth

1.2 km

4. Turn right at Macauley Ave

700 m

5. Turn left at Stacey St

2.2 km

6. Turn right at Hume Hwy

3.4 km

7. Exit onto Centenary Dr

3.4 km

8. Continue onto Homebush Bay Dr

3.4 km

9. Continue onto Concord Rd

1.7 km

10. Continue onto Church St

750 m

11. Take the exit towards Victoria Rd

240 m

12. Turn right at Victoria Rd

5.2 km

13. Take the ramp on the right onto Burns Bay Rd(on approach to Gladesville Bridge)

3.0 km

14. Turn right to stay on Burns Bay Rd

190 m

15. Slight right to stay on Burns Bay Rd

Go through 1 roundabout

1.5 km

Lane Cove NSW

you could crank a route similar to this-

http://maps.google.com.au/maps?f=d&sou...528374&z=12

king georges, roberts rd, centenary drv through homebush - then victoria rd exit when you hit ryde

edit: doh beaten

I would LOVE to own a bike, but I'm fairly convinced I would get killed on it, so I'd prefer to be late then dead, even though it would be a lot of fun on the way!

Anyway I found that way pretty good on the way home, but on the way to work the Hume Hway/Centenary Dr was clogged until the M4, is there a way to bypass that?

I would LOVE to own a bike, but I'm fairly convinced I would get killed on it, so I'd prefer to be late then dead, even though it would be a lot of fun on the way!

Anyway I found that way pretty good on the way home, but on the way to work the Hume Hway/Centenary Dr was clogged until the M4, is there a way to bypass that?

;) EARTH will do the trick, failing that use the UBD

Welcome to revesby :worship:

best way to get there in the morning would be to go thru punchbowl rd/or canterbury rd then onto roberts rd and onwards to homebush/lanecove rd. i have never actually done it that way before.. or ever had to get there at that time.

get a job closer!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...