Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just need some advice on tyre sizes, I have just ordered some new TE37 18x10.5 +15 for my R33 GTR

i have been recommended 265/35/18?

Any help would be much appreciated.

Thanks :)

And i just realised i just posted in the wrong section! :)

Edited by -BCNR33-
Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/
Share on other sites

You want tyre choice or tyre sizing?

Tyre choice I went for Kumho's as they are an all round decent tyre.

Tyre sizing, what ppl have mentioned above.

Any information will help what would be the best tyre for around $375-$400 each im not looking at spending big $$

Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5395297
Share on other sites

KU36 is within that price range. I'd go 285/35 or 275/40. Just guesstimate. I dont think you'll need any guard work but it normal for drivers side to scrub when doing a full lock right turn unless you have adjustable rods.

Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5395420
Share on other sites

KU36 is within that price range. I'd go 285/35 or 275/40. Just guesstimate. I dont think you'll need any guard work but it normal for drivers side to scrub when doing a full lock right turn unless you have adjustable rods.

I had a quick look on the Kuhmo Australia website and they dont list a ku36 in a 285/35/18?

Any other options?

I dont want the stetch look.

Thanks :P

Edited by -BCNR33-
Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5395483
Share on other sites

I had a quick look on the Kuhmo Australia website and they dont list a ku36 in a 285/35/18?

Any other options?

I dont want the stetch look.

Thanks :P

Hmmm... yea from the looks of it. Even Federals doesnt make 285s. Maybe try calling some tyre shops. I'm running Bridgestone Potenza RE050A 285/30/18 and I think they're way too exp...

Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5395578
Share on other sites

Any information will help what would be the best tyre for around $375-$400 each im not looking at spending big $$

Like what Brandon said, that will get you a set of decent tyres.

I had a quick look on the Kuhmo Australia website and they dont list a ku36 in a 285/35/18?

Any other options?

I dont want the stetch look.

Thanks :P

You might have to head down to your mechanic / tyre place to see if they can sort out a set.

Don't have to be KU36's, anything in the Kumho Ecsta range will do you fine.

I assume your car is for street use..?

Depending on how low you ride height is, that is when you need to worry about guard work.

Only roll / flare your guards if you want the Hellaflush look, which I assume is not what you want, cuz to go Hellaflush, you need to stretch your tyres.

As long as you fill out your guards and the ride height / wheel arch sits just above the tyre, you will be fine.

You got fully adjustable coilovers?

Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5395581
Share on other sites

Like what Brandon said, that will get you a set of decent tyres.

You might have to head down to your mechanic / tyre place to see if they can sort out a set.

Don't have to be KU36's, anything in the Kumho Ecsta range will do you fine.

I assume your car is for street use..?

Depending on how low you ride height is, that is when you need to worry about guard work.

Only roll / flare your guards if you want the Hellaflush look, which I assume is not what you want, cuz to go Hellaflush, you need to stretch your tyres.

As long as you fill out your guards and the ride height / wheel arch sits just above the tyre, you will be fine.

You got fully adjustable coilovers?

Yea my car will mainly be used for street, i wont be looking at having the car heaps low just at a nice height and i will be using Greedy type s coilovers.

Ill ring around and get a few prices on 285/35/18 in the Kuhmo Ecsta range.

Thanks for all the help! :P

Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5395607
Share on other sites

Yea my car will mainly be used for street, i wont be looking at having the car heaps low just at a nice height and i will be using Greedy type s coilovers.

Ill ring around and get a few prices on 285/35/18 in the Kuhmo Ecsta range.

Thanks for all the help! :P

No worries!

:P

Post some pics when done.

I have the same wheels but in 17 x 9 +22 ;)

Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5395822
Share on other sites

No worries!

:P

Post some pics when done.

I have the same wheels but in 17 x 9 +22 ;)

Unfortunately the wheels are being made atm due to the size not being made of the shelf :(

When i get them around January i will definitely throw some pictures up! :D

Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5395946
Share on other sites

18 x 10.5 is a custom sizing?

So you take it to a wheel specialist and they re-widen the wheel?

I bought the wheels through Jesse Streeter and i was told there isn't stock available and had to be manufactures in that size.

Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5397168
Share on other sites

I bought the wheels through Jesse Streeter and i was told there isn't stock available and had to be manufactures in that size.

Ok so you ordered wheels from him and he is getting the custom made up for you before he sends it over from Japan?

Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5397243
Share on other sites

Ah ok, I get you now.

Worth the wait I guess... :P

Or you could have got the next size that was available to that and use a small spacer...

I didn't really want to use spacers as its a bit of mucking around i just wanted something i could put straight on and look good

It's worth the wait as im still waiting for the car itself! :D

Link to comment
https://www.sau.com.au/forums/topic/332646-tyre-choice/#findComment-5397284
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Omg Brake pedal removal.. FML!!
    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
×
×
  • Create New...