Jump to content
SAU Community

Recommended Posts

have a mate pulling a 2.5lt one down. engine/driveline is already gone.

if you are interested - post up what you want off it. car is in nagoya. bits will load on the next container out.

Link to comment
https://www.sau.com.au/forums/topic/332899-anyone-need-35-sedan-bits/
Share on other sites

nick,

1.have that comng already.

2.unsure of colour - its and 03/04 model - front left hit. - will check.

3. do not think its bose. - will check

Son,

I'll grab that. do you want the whole thing?

it is easier if I get he whole shelf. its not really pick a part wrecking as I can ask for various bits but they usually come as an assembly. Basically I get one shot at the car before it goes to the crusher.

Oh ok no worries!

Anyway my car is 2005 S2 sedan and does the 03/04 3rd brake lights are the same?

Maybe going to buy a V35 Coupe Manual.

Its non Navi but top glove box has the blank cover missing from the optional navigation dvd drive - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

Maybe going to buy a V35 Coupe Manual. Would like to know how much a few things are to replace to negotiate in price.

Its non Navi but inside top glove box has the blank cover missing from the optional navigation dvd drive, its just a big hole atm - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

With the air induction - it no longer looks like this

Grill.jpg

The grill to collect air is not there and the air box is not there, just has a pod filter on the end of the hose.

Should i care about this?? when looking where the box was you can just see the drain hole..

Also the right hand side window when your in the car goes all the way up and into the sill. But

1. when you open the door the window comes down (as it should) and when you close it, does not go back up

2. when you hold down the button to put window up or down it doesnt automatically do it itself

3. when the door is open the button will not make window go up or down

Do you have the mechanism to fix this? the guy said some japanese parts place near south port quoted him 20-30 to fix...

Oh also the little plastic cover that goes over the screw in the inside left door handle - need that

Edited by R6n350GT
Maybe going to buy a V35 Coupe Manual.

Its non Navi but top glove box has the blank cover missing from the optional navigation dvd drive - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

need more detail on the 'gear changer' :)

have a non navi panel - when you buy the car we can talk the sphincter of the universe.

Maybe going to buy a V35 Coupe Manual. Would like to know how much a few things are to replace to negotiate in price.

Its non Navi but inside top glove box has the blank cover missing from the optional navigation dvd drive, its just a big hole atm - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

With the air induction - it no longer looks like this

The grill to collect air is not there and the air box is not there, just has a pod filter on the end of the hose.

Should i care about this?? when looking where the box was you can just see the drain hole..

Also the right hand side window when your in the car goes all the way up and into the sill. But

1. when you open the door the window comes down (as it should) and when you close it, does not go back up

2. when you hold down the button to put window up or down it doesnt automatically do it itself

3. when the door is open the button will not make window go up or down

Do you have the mechanism to fix this? the guy said some japanese parts place near south port quoted him 20-30 to fix...

Oh also the little plastic cover that goes over the screw in the inside left door handle - need that

didnt see the rest of this:

1,2,3: motor or calibration. if motor I can get them. if calibration thats easier. again when you get the car we'll talk the sphincter of the universe.

trim item inside door handle - always missing - $5 part from nissan.

didnt see the rest of this:

1,2,3: motor or calibration. if motor I can get them. if calibration thats easier. again when you get the car we'll talk the sphincter of the universe.

trim item inside door handle - always missing - $5 part from nissan.

Thanks Chris,

Meant to say gear stick knob not changer.

Gearstickknob.jpg

How do we know about what i need for window ?

As for the trim, save me going to nissan can u also get this?

Also for the other question re: cold air induction cover and box, should i leave as is or ?

Be great if you can PM me some prices, just so i know how much i barter with the seller.

Cheers

Edited by R6n350GT

knb would be better off new ex nissan. anything I lay hands on in that area is going to be worn.

I can lay hands on 90% of the small bits on that car. if they are big bits I have to get a mate involved and that costs money.

window is likely to be a motor. since you are in QLD - where?

Edited by Chris Rogers
knb would be better off new ex nissan. anything I lay hands on in that area is going to be worn.

I can lay hands on 90% of the small bits on that car. if they are big bits I have to get a mate involved and that costs money.

window is likely to be a motor. since you are in QLD - where?

In Gold Coast, Robina.

For big stuff can come down to Brissy.

Any advice on what kind of price i need to try and save on the car to pay for these fixes?

Glad i got you close by when i start all these mods!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...