R34 Gtt Fmic - Show Us What Ya Got!

[rondofj]

Good day dudes, I'm thinkin of putting in a Cooling Pro cooler from Just Jap in Sydney (approx $300 i think for cooler plus piping) in my R34GT-T - current mods - full 3.5 turbo-back zorst with dump, pod filter in cold air box, turbosmart manual boost controller at 12psi.

Has anyone got this and any pros and cons of this particular cooler? What size cores are everyone using? LXWX thickness etc, I've read the DIY and know you have to cut bits of the bumper and reo bar etc. How hard is the whole job and how much time does it generally take? And should I go bar & plate or tube & fin, return flow or standard flow etc?

Please post up pics of your coolers and how its fitted etc, if possible, that would be very much appreciated..

thanks in advance for the help.........

Ron

[TMW-R34]

Good day dudes, I'm thinkin of putting in a Cooling Pro cooler from Just Jap in Sydney (approx $300 i think for cooler plus piping) in my R34GT-T - current mods - full 3.5 turbo-back zorst with dump, pod filter in cold air box, turbosmart manual boost controller at 12psi.

Has anyone got this and any pros and cons of this particular cooler? What size cores are everyone using? LXWX thickness etc, I've read the DIY and know you have to cut bits of the bumper and reo bar etc. How hard is the whole job and how much time does it generally take? And should I go bar & plate or tube & fin, return flow or standard flow etc?

Please post up pics of your coolers and how its fitted etc, if possible, that would be very much appreciated..

thanks in advance for the help.........

Ron

I put in a cooling pro return flow cooler about 2 months ago.

Its a 600x240x75 (2.5inch) i have had no problems with this, its a tube and fin core. Being return flow mate, its very simple as is just connects to the standard plumbing from the smic, if your wanting to do it yourself, you cant go wrong with this. Ive been told its capable of around 280rwkw. It took us about 3 and a half hours to fit and i cut about 10mm off the front bar, thats it!

[rondofj]

I put in a cooling pro return flow cooler about 2 months ago.

Its a 600x240x75 (2.5inch) i have had no problems with this, its a tube and fin core. Being return flow mate, its very simple as is just connects to the standard plumbing from the smic, if your wanting to do it yourself, you cant go wrong with this. Ive been told its capable of around 280rwkw. It took us about 3 and a half hours to fit and i cut about 10mm off the front bar, thats it!

hEY THANKS MATE, THATS VERY HELPFUL OF YOU, I GUESS IT SOUNDS OKAY AS I'M NOT AIMING FOR OVER 300RWKW, JUST A MEAN STREET APPLICATION...

CHEERS RON

[jm3oo5t_r34gtt]

I put in a cooling pro return flow cooler about 2 months ago.

Its a 600x240x75 (2.5inch) i have had no problems with this, its a tube and fin core. Being return flow mate, its very simple as is just connects to the standard plumbing from the smic, if your wanting to do it yourself, you cant go wrong with this. Ive been told its capable of around 280rwkw. It took us about 3 and a half hours to fit and i cut about 10mm off the front bar, thats it!

gudday mate can you ps show me some pics of your fmic??cause im planning install a front mount intercooler for my r34 gtt and i wanna see how my cars gonna looks like if i put cooling pro fmic return flow thanks mate!!!

Edited October 16, 2010 by jm3oo5t_r34gtt