Jump to content
SAU Community

How to turbo your N/A

666DAN

By 666DAN,
in Engines & Forced Induction

 Share

Recommended Posts

N-DAWG Mentor

N-DAWG

Posted
Posted

Grunta, I'm not sure about the ECU on the GTT vs NA on the Auto models. From my understanding you still need to run engine management? Someone might want to clarfiy that.

How much are RB25DE's worth for resale? I'm just thinking what the cost for you would be to Buy half cut, deliver it, remove old engine, install new engine, then whatever else still needs to be done after that; vs keeping your engine, even still removing it and doing internal engine work. I'm not sure exact costs, but would that not be rather close to that of complete engine swap? A rebuilt GT-V I think would be better than simply swapping over for a DET, if you're looking at removing the engine.

  • Replies 862
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

MirKz
MirKz

havent you forgotten to list pistons ? you need low compression pistons, otherwise using the standard high compression pistons that NA's have will just F*&k ure engine VERY quickly.. although i h

mrjelly
mrjelly

i have a 1993 r32 gts with a rb20det conversion. i bought it this way so i dunno whats been done. power seems sweet up until 5000rpm, where it seems to hit some flat spots in power from there onwards.

unarmed_skyline
unarmed_skyline

hey i just though i would go back a little bit and add something in, in relation to drilling the oil return line into the block a way of getting around this would be to buy an oil cooler and run the o

Posted Images

N-DAWG Mentor

N-DAWG

Posted
Posted

Well I'm almost ready to have it all put in!

Just waiting on FMIC and catch can to arrive, then need to try get a factory BOV or cheap but good plumback and pod filter.

I also believe that I will need a silicon aftermarket or factory induction pipe that goes to the turbo inlet...or can the factory one be modified to suit?

Also any recommendations for tuning places? I think Robin said he usually sends them over to APC, something close to slacks creek would be ideal to get it all done together.

How driveable is an RB25DE+T without having the tuning and timing adjustments done straight away?

dori34 Grand Master

dori34

Posted
Posted (edited)

^ driving it straight away without any tuning or timing would be highly not recommended.

ecu will be running nuts with all the extra air & shiet coming thru..

will a stock manifold from a R32/33 fit on a R34 neo?

Edited by dori32
Vik Mentor

Vik

Posted
Posted

Nathan man goodluck dude, im still contemplating the firgures behind the upgrade.

ETA on when your gonna' start ?

And how you gonna' get the car from the place your getting the work done to the tuning place, i dont think it will be driveable.

MRXTCZ

N-DAWG Mentor

N-DAWG

Posted
Posted
Nathan man goodluck dude, im still contemplating the firgures behind the upgrade.

ETA on when your gonna' start ?

And how you gonna' get the car from the place your getting the work done to the tuning place, i dont think it will be driveable.

MRXTCZ

Yeah the figures can add up quite quickly, but it depends on where you get parts from. Keep a look out on ebay as well, I've seen some R34 Neo model turbos going recently, and even saw a set of neo injectors listed at $20 starting! Check the for sales here as well, always bargains keep coming up, and on NS.

I decided to see how I go with a Monsta Performance Delta Fin Intercooler. They sell on ebay for $350+$54, but lately they've done some starting at 1cent. I didn't have much luck the first time fighting over it in the last minute, but second time around I picked it up for $252 plus $54, for a full kit. For what it's worth I'll see how it goes.

I'll probably get it done at PerFourMance motorsport in Slacks Creek, pretty sure there's tuning places around there, it's like performance heaven down there lol Hopefully getting it from workshop to tuner won't be too much of a problem then.

Robin at Perfourmance said he usually sends them over to APC, which is about 1.9kms away. Then again, a brief search spat out some not so favourable results, so now I'm really not sure of where to go.

I'm still getting to know the places around Brisbane to get work done, so I'm really open to suggestions. I don't want to break the budget in labour, but I'd rather spend a little more if I need to and get quality work done..specially when it comes to the tuning of a RB25DE+t

I'm probably going to proceed with the conversion either before or after xmas. I want to take a trip back down to the Gong for xmas though, so that's why I'm thinking after xmas. Though I've got pretty much everything in or on the way except for a BOV and pod filter, so knowing me I'll get impatient and just get it done with :D

I've been thinking of options with exhaust as well, contemplated the idea of having a 3" mandrel bend (or 2.75"??) made up with resonators and a GTR Muffler if I can get hold of a cheap one. That way I can keep the factory look and stay quiet, and I figure that the GTR Muffler should flow well enough for my needs. I'm not sure what the weight would be like though compared to an aftermarket S/S.

N-DAWG Mentor

N-DAWG

Posted
Posted

Used Exhaust Manifolds:

http://www.skylinesaustralia.com/forums/Ni...amp;hl=manifold

http://www.skylinesaustralia.com/forums/R3...amp;hl=manifold

http://www.skylinesaustralia.com/forums/Vi...amp;hl=manifold

http://www.skylinesaustralia.com/forums/R3...amp;hl=manifold

N-DAWG Mentor

N-DAWG

Posted
Posted
^ thanks nate dawg.

other things im getting are brand new; fuel pump, intercooler,exhaust etc

No worries man

I picked up my Walbro GS342 on ebay for $145 posted from http://stores.ebay.com.au/PERFORMANCE-WORLD-STORE:

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=320308878704

They are super quick with postage. I bought it on a sunday, had it delivered to work, it was on my desk when I got there!

As for intercoolers, I got one of these Monsta Intercoolers on ebay http://stores.ebay.com.au/MonstARetailCentral.

For the price I'm willing to see how they go:

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=220294349334

They do one listing at a time starting at 1cent. Or you can choose the buy it nows, works out around $400ish posted. I got mine $304 all up in the end, it's a bit of a fight bidding for it in the last few minutes though.

Exhaust, unless you can pick up a second hand one, just get a custom one made up. Mr XTC might have a 3" catback for sale if he doesn't give in to doing the turbo conversion :/

dori34 Grand Master

dori34

Posted
Posted

^ Lol fair enough.

yeah im gonna get all the stuff in syd if i can..

so jjr stealth cooler kit, walbro pump from gas motorsports etc

want it all local to save postage & i can inspect stuff before purchasing :P

since its only gonna be done once might as well do things properly.

my turbo should be arriving on my work desk tomorrow or so

cant wait!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...