Jump to content
SAU Community

Recommended Posts

What can people suggest in the way of cheap semis, new or second hand, for 235 17's I bought a learner set from Donnelans a while back and they were only $260 delivered to Albury, granted they were nothing special condition wise but they've done me alright for 3-4 track days to learn on. I'm happy enough in my braking and the balance of the car that I can afford to buy some better second handers or maybe even something new as I won't be flat spotting them hopefully.

I'm also after cheapy Toe Arms for the S13, I've used ISC rear camber arms and they were decent for the money. His toe arms are about 180 and I've seen sets on ebay for around $100, not sure on quality though.

Given the car is only a CA and doesn't run blistering laps times it's not going to be critical but has anyone had any experience with anything cheaper than the isc items?

Edited by ActionDan
Link to comment
https://www.sau.com.au/forums/topic/334146-cheapo-semis-and-toe-arms/
Share on other sites

The KU36's seem to be quite popular, though not a semi slick, but I'm guessing that lap times on a new set of those would be similar and possibly better than what I'm getting on these thrashed semis. Is there a semi that's comparable cost wise?

The KU36's seem to be quite popular, though not a semi slick, but I'm guessing that lap times on a new set of those would be similar and possibly better than what I'm getting on these thrashed semis. Is there a semi that's comparable cost wise?

I was still considerably faster on thrashed re55's than i was on fed 595rs's. Unless you have AO48's, then yes, all rounders will be faster if the semis have been heat cycled a fair bit. The kumho semis would be the pick of the cheap ones but you are still looking at 1300ish. Personally i'll never bother with r888's again, they are around the same price.

On the toe arms front, I've seen 2 isc arms snap at welds. I wouldn't use them, or anything cheaper for that matter. I use D project camber and toe arms in my track car, cheapish and the quality is ok. They seem to be holding up too, plus replacement rose joints are available. Camber arms are about 3 years old now with many track days and toe arms have survived 7 or 8 track days.

Interesting in the differing opinions. the KU36 thread seemed to have some OK results when compared to flogged semis, which mine are.

The other option is finding some half decent second handers. Being heat cycled a few times from what I thought just makes the compound harder so longer to get up to temp and less grip but also harder wearing?

Edited by ActionDan

I do have two sets of rims, but I only use one set on the track and the car is pretty much track only so I can use whatever tyres I want. The street rims are just plain 5 spoke 17's with the tyres that came on the car. The track rims are 9" volks with 235 semis.

http://www.cazmanindustries.com/

he makes super high quailty parts. cost a little bit more but are full rebuildable and wont break. send him an email and see what he says.

he's highly recommended on nissansilvia.

ahh yeah I nkow Caz from NS. Good idea.

MArlin, where were you going with that second set of rims comment? I'm not worried about burning up tyres on the street as I dont street drive very often and when I do it has street rims/tyres. So I can leave my semis on the track rims. What are the mini ones setting you back and what size?

I've used the Mini ones for 270klm at Lakeside so far (at 10/10ths), and the worst of the four is maybe one third worn.

They were virtually new (maybe 5/6 laps) when I got them and they cost me $100 each plus some freight to me from Melbourne. I since found I can get in Bris for $75 each. LOL

Dan, two sets of wheels means you drive to the track and bolt on the second set that were in the boot and back seat with proper race tyres, slicks even. IMO you are over-wheeled with 9 inch rims on that car.

The Mini Challenge tyres are Dunlops, size is 215/45/17, but I measured them because they looked so much bigger, and turns out they are nearly identical in size and width to my Dunlop and Kuhmo 235/45/17's.

Edited by Marlin

I dont need to do that as the car gets towed to the track so the track rims and tyres stay on :)

That's awesome value!

I think you should PM me some details on where I can hook up with those :thumbsup:

Correction 8" fronts (or are they 8.5's? can't remember) and 9" rears. For the cost of the rims I couldn't say no. A bit of extra rim width is fine to me, they take the 235's well with nice straight sidewalls, none of this drifter stretched habib shizzle going on.

Hook me up Ben :D If they're as wide as you say they would be perfect for my car.

Awesome, thanks. If they're as wide as you say then they should fit my 9" rears without issue also. Just to confirm, you comapred your 215 mini tyre to a 235 Dunlop and Kuhmo semi or road tyre? What model is the mini tyre?

I placed them beside both 235/45/17 Kuhmo KU36 road tyre and Dunlop O3G road/race tyre and they are virtually itendical in width, so they are a 'big" 215.

I make no promised re the suitability to 9" rim.

This Dunlop slick has no info other than "Dunlop" and a big bunch of Japanese text. I suspect they are imported specifically for the Mini Challenge.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...