Jump to content
SAU Community

R34 Gtt 2001 Write Off

khuss88
 Share

Recommended Posts

khuss88 Contributor

khuss88

Posted
Posted

Hey Guys ,

I am located in tullamarine Melbourne. I recently wrote of my Black R34 2001 GTT Series II and I was not insured so im therefore stripping the car for parts to get whatever I can back. Im selling the car as is for $1000 and the parts listed below are sold separately . The car as is includes pretty much all the mechanical parts apart from the intercooler so engine gearbox diff rear brakes stock wheels windscreen suspension etc. The rear interior is also fine but front interior is all damaged. Steering wheel also appears to be usable. The damage is pretty bad as you can see from the pics but the engine appears to be undamaged. So this car is perfect for someone who is doing a reco etc. I simply dont have the mechanical skills to take off all the parts so Im selling it cheap as is coz its just sitting at the front of my house and I need it gone. Open to any reasonable offer keeping in mind the 2001 model is very rare and the car was very clean , I was only driver in Australia and only drove it for about 6 months (engine done 120,000km). I will also post interstate via cash on delivery or courier if needed. CALL OR TEXT ME ANYTIME ON 0423809544 FOR ANY QUOTES QUESTIONS PRICES OFFERS MORE PICS ETC ..

Some pics of the car as is

post-75291-1279969792_thumb.jpg

post-75291-1279969840_thumb.jpg

img-resized.png Reduced 96%post-75291-1282658777_thumb.jpg 3264 x 2448 (1.89MB)//

img-resized.png Reduced 93%post-75291-1282658875_thumb.jpg 2048 x 1536 (1.31MB)//

img-resized.png Reduced 96%post-75291-1282659241_thumb.jpg 3264 x 2448 (1.78MB)//

The parts for sale that are off the car and ready to sell are:

1. Rear bar - excellent condition - $200

post-75291-1280231217_thumb.jpg

2. Rear lights - $250

post-75291-1280231356_thumb.jpg

3. Front Pair of Xenon lights - $500 SOLD

4. Stock intercooler + piping and box - $100 SOLD

5. Front Series 2 bar with grillz (tiny dint) - $250

post-75291-1280231595_thumb.jpg

6. Complete drivers side door with mirror power windows and all - excellent cond just needs a good wipe- $300

post-75291-1280232176_thumb.jpg

post-75291-1280232260_thumb.jpg

7. Stock Spoiler $150

8. Front headrests - $80

9. Cd Stacker $70 (also have a pioneer japanese dvd navigation unit that came in the car from japan for sale)

CALL OR TXT 0423809544 ANYTIME !!!

Link to comment
https://www.sau.com.au/forums/topic/334173-r34-gtt-2001-write-off/
Share on other sites
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Replacing Fuel Pressure Regulator

      By Duncan · Posted

      I'm going to slap an old nismo logo sticker on my spare one and sell it to the land of the free for a thousand bucks
    • Duncan
      Replacing Fuel Pressure Regulator

      By Duncan · Posted

      lol, probably should have read further!
    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Well - they have arrived.  And they are easy on the eye to put it mildly... These only have three bolts - but for a start there is a key that fits with vacuum like precision..  And as you can see by my ruler, the interface is large..   I listened to a podcast on HP Academy about Dan (KiwiCNC) and I'm more than comfortable he knows what he is doing. R35 Bearing assembly should arrive later today so can mock that up for a look. Can't wait to get these on and get some brake pressure logging too. IMG_3860.MP4
    • GTSBoy
      Nismo GT Pro LSD configurations

      By GTSBoy · Posted

      I would be very confident that they are the same parts (the 2 different SKUs). It seems very clear that you can drop the cam in the 2-way opening, or in the other opening. If you arrange it in the other opening in the same way that you see any other 1-way diff, ie, with the flat of the cam up against the 1° side of the opening, then it would work as a 1-way. It can only spread the ramps when driving forwards - cannot spread the ramps on overrun. It would then appear obvious that if you put the cam into the opening "backwards", that you would get the angled flats of the cam working onto the "points" of the 1° side of the opening, which would give you ramp spread in both loading directions. I do wonder if the forward direction of the 1.5-way config is equivalent to the forward direction of the 2-way, seeing as the cams are flipped and the angled surfaces on those would need to be the same on each side - AND - clearly when installed in either the 2-way or 1-1ay configuration they are not intended to work exactly the same (the ramp angles on the 2-way are 10° different between forward and backward, and the ramp doesn't exist in the 1-way config). 'twere me, I think I would rather actually have a set of rings that offered the 2-way with two different sets of ramp angles, say the 55/45 of the existing design and maybe a 45/37.5 combo for a less aggressive effect), AND another set of rings with a dedicated 1.5-way opening and a dedicated 1-way opening. The 1.5-way opening would actually have the steeper angle on the overdrive side that causes it to be less pushy than the forward drive angle, like you see in many other diffs. But really - if this Nismo thing is thought out properly and all those surfaces work on each other the way that they need to, who am I to argue?
    • GTSBoy
      Nismo GT Pro LSD configurations

      By GTSBoy · Posted

      I would be very confident that they are the same parts (the 2 different SKUs). It seems very clear that you can drop the cam in the 2-way opening, or in the other opening. If you arrange it in the other opening in the same way that you see any other 1-way diff, ie, with the flat of the cam up against the 1° side of the opening, then it would work as a 1-way. It can only spread the ramps when driving forwards - cannot spread the ramps on overrun. It would then appear obvious that if you put the cam into the opening "backwards", that you would get the angled flats of the cam working onto the "points" of the 1° side of the opening, which would give you ramp spread in both loading directions. I do wonder if the forward direction of the 1.5-way config is equivalent to the forward direction of the 2-way, seeing as the cams are flipped and the angled surfaces on those would need to be the same on each side - AND - clearly when installed in either the 2-way or 1-1ay configuration they are not intended to work exactly the same (the ramp angles on the 2-way are 10° different between forward and backward, and the ramp doesn't exist in the 1-way config). 'twere me, I think I would rather actually have a set of rings that offered the 2-way with two different sets of ramp angles, say the 55/45 of the existing design and maybe a 45/37.5 combo for a less aggressive effect), AND another set of rings with a dedicated 1.5-way opening and a dedicated 1-way opening. The 1.5-way opening would actually have the steeper angle on the overdrive side that causes it to be less pushy than the forward drive angle, like you see in many other diffs. But really - if this Nismo thing is thought out properly and all those surfaces work on each other the way that they need to, who am I to argue?
×
×
  • Create New...