Jump to content
SAU Community

Recommended Posts

hey all people am back to you guys again to get some idea's and help, i searched in fourm for my problem but no cure for my car with search engine.

car in question is R33 gts-t s1 auto with catback exuast.rest is stock.

am having a problem with my car,recently i was driving and on a intersection its just died on me so i thought whats wrong and i started again and its start no trouble.

since then its start great every arvo as i work in arvo shifts,nothing drama's for 20 minutes driving and then its just cut itself dosn't matter i am on intersection or driving its just shut it off and then if i start its good again and after few minutes same cuts out again.

during the night when i finished my job and driving home no drama most of time.

i searched in this fourm and i cleaned AFM,air valve,change oil,oil filter,fuel and air filter but nothing good

today again after 20 minutes driving same situation but driving back at night no problem.

i dont know what to think and where to look....if you guys know anything or faced this kind of problem in past please be kind and show me some right way to fix it.

Thanks All In advance

ok.....

check oil level on auto box.

make sure you do not have a atmo BOV. autos need to recirc to keep the engine running.

thats all i can think of at the mo. my auto used to die rolling up to intersections to stop.

  • Replies 101
  • Created
  • Last Reply

Top Posters In This Topic

nah mate i did check trans level,actually i regularly do trans service by professionals.

All sorted out now it was a AFM dry joints after redoing it all good..

but still confused why car behaved nice in night driving but different in day time...but ends well...thnx for you advise mate

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
×
×
  • Create New...