Jump to content
SAU Community

Recommended Posts

There are plenty of kits out there on the market, both Jap & US kits will do.

I will be fitting the Stillen gen 2 true dual system to my car tomorrow.

Best option would be to spend the money and get your zorst from a recognised manufacturer as they have spent the time and money to R&D a proper system.

If you go get a custom done here at your local pipe bender, you will more than likely end up with a drone. :starwars:

Edited by pv35gt8
Like the topic header thinkin of gettin an exhaust for my V35 sedan , has anyone had any experience with them? are this kits for the US G35 suitable for a V35? or is the best way to go custom? Any advice is appreciated

The G35 sedan exhausts should fit, but IMO you can't really go past an exhaust from one of the major Japanese makers (Fujitsubo, Weldinum/Nismo, Kakimoto etc).

Having said that, I will be more than happy to be proven wrong by James' Stillen system tomorrow (you forgot to mention that we are doing your extractors as well mate! Aren't they Tomei?)

true so what places are there here to get the bits from ??

Yep, as below... Yahoo Auctions.

For exhaust stuff, I use Import Monster and have it shipped by sea in one of their containers.

They will then ship it to your door for a good price.

Alternatively you could always request RHDJapan to list the part and buy it through them.

yahoo.jp

fujitsubo from $800 + $250 delivery

:P

I was lucky enough to have something like this upon purchase on my 300GT Sedan.

http://www.nengun.com/impul/blast-ii-muffler

I don't know alot about this but my car is only single exaust and sounds nice and quite responsive.

Maybe I have the Blast 1 ?

Not sure if I meet EPA levels either ?

There are plenty of kits out there on the market, both Jap & US kits will do.

I will be fitting the Stillen gen 2 true dual system to my car tomorrow.

Best option would be to spend the money and get your zorst from a recognised manufacturer as they have spent the time and money to R&D a proper system.

If you go get a custom done here at your local pipe bender, you will more than likely end up with a drone. :action-smiley-069:

how does the stillen system go?

The Buddy Club will be loud

I don't know anything about Megan Racing.

Very, very tough to go past a Fujitsubo exhaust.... in any car! Not to mention that it will be a guaranteed bolt on upgrade.... as opposed to fighting with something that the Americans call "bolt on"... aye James?

as opposed to fighting with something that the Americans call "bolt on"... aye James?

Yes the Stillen was a bit of a fight to line up, but we got it there in the end.

The lovely note it produces was worth the effort :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
×
×
  • Create New...