Jump to content
SAU Community

Recommended Posts

can't remember if it was someone on here or the uk gtr forum that was doing it but they did their own r&d on an rb30 sump adapter/4wd conversion plate, and i think they have a few made up. if i find it i'll post up a link. btw, i have an r32 gts4 as well. same colour as yours i take it from your pic. its in pretty good nick except for the paintwork cause the clear is lifting from the top edges of most of the bodywork and making its way down lol. just out of curiosity do you, or anyone else reading this thread, know what sort of paint the original paint is? i.e 2pac or acrylic etc?

yes that is mine. same problems with paint. it has been left outside most of its life I figure. most iof the small inside plastics are rotted and the rubbers are perished as well.

since youare in brissy I would not mind a chat. I think I know the person that you are talking about regarding the 4wd adapter plate.

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

yep and thats where I'm going to start. engine I can source the bits myself, assembly - I share the building with an alfa / nissan mechanic -between the two of us we can screw it together.

the only hanging block is this plate to bolt the sump onto.

Great that your going for "the ultimate" rb block. You sound tenacious enough to sort this out.

yes that is mine. same problems with paint. it has been left outside most of its life I figure. most iof the small inside plastics are rotted and the rubbers are perished as well.

since youare in brissy I would not mind a chat. I think I know the person that you are talking about regarding the 4wd adapter plate.

yeah same with mine, it was in somebodies yard up north unregistered for several years. but the interior in mine turned out to be in awesome condition when it arrived so we were pretty happy.

anytime you wanna chat let me know i'm on here at least every couple of days.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...