guanyyr34 Posted September 18, 2010 Share Posted September 18, 2010 hey guys jsut bought a pod filter for my car was about to remove the stock box and put the pod in and then realised that there was a vacume hose or something conected to the box.. what do i do with this hose when i remove the box? is it needed? cheers Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/ Share on other sites More sharing options...
sevened Posted September 18, 2010 Share Posted September 18, 2010 Don't meant to hijack this thread but I was just thinking about putting in a pod filter in the car too. Saw KnN ones at autobahn going for around $100. Is there 'kit' or adapter that I might need to install this? If so does it usually come with the Pod Filter? Or must I get it seperately? Running a R34GTT S1. And advice would be much appreciated!! Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5453510 Share on other sites More sharing options...
Mr_!mport Posted September 18, 2010 Share Posted September 18, 2010 hey guys jsut bought a pod filter for my car was about to remove the stock box and put the pod in and then realised that there was a vacume hose or something conected to the box.. what do i do with this hose when i remove the box? is it needed? cheers I have installed 2 pod filters in r34 skylines and in the past hav just normally unpluged the hose from the box and put some tape on the end. It appears to not hurt the car in any major way if anything it is just a un-necessary sensor. You should be fine. Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5453560 Share on other sites More sharing options...
Mr_!mport Posted September 18, 2010 Share Posted September 18, 2010 Don't meant to hijack this thread but I was just thinking about putting in a pod filter in the car too. Saw KnN ones at autobahn going for around $100. Is there 'kit' or adapter that I might need to install this? If so does it usually come with the Pod Filter? Or must I get it seperately? Running a R34GTT S1. And advice would be much appreciated!! Hay, the intake manifold has a 3" inlet so if you correctly remove the intake box and slide the pod filter onto the intake rubber pipe and use the supplied hose clamp. No other adapter kit is necessary if your running a k&n filter. But i must advise against it i use a k&n panel filter and that works just as well. But try not to put a pod filter in and let it suck hot air from the engine you may loose performance. Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5453562 Share on other sites More sharing options...
guanyyr34 Posted September 18, 2010 Author Share Posted September 18, 2010 I have installed 2 pod filters in r34 skylines and in the past hav just normally unpluged the hose from the box and put some tape on the end. It appears to not hurt the car in any major way if anything it is just a un-necessary sensor. You should be fine. cheers mate ye that's wat I was thinkin also Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5453678 Share on other sites More sharing options...
Serg Posted September 19, 2010 Share Posted September 19, 2010 I have installed 2 pod filters in r34 skylines and in the past hav just normally unpluged the hose from the box and put some tape on the end. It appears to not hurt the car in any major way if anything it is just a un-necessary sensor. You should be fine. Dont tape the end shut! It needs to "breathe", that why its connected to the air filter box... A) Leave the hose there hanging, cops wont like it but its up to you where to role it up and hide it B) Follow where the hose goes and remove the hose complete. Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5454127 Share on other sites More sharing options...
Jay11 Posted September 19, 2010 Share Posted September 19, 2010 (edited) Or depending on the size of the hose just get a small breather filter for it, like the one below. Edited September 19, 2010 by jaylon Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5454304 Share on other sites More sharing options...
guanyyr34 Posted September 20, 2010 Author Share Posted September 20, 2010 Or depending on the size of the hose just get a small breather filter for it, like the one below. bag the hose is tiny probably only a 5mm opening if that I will b making a heatsheild/ box for it so wen that is done I'll connect it into that for the time Being I'll just leave it hanging.. Cheers for the help Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5455406 Share on other sites More sharing options...
GUN_METAL_GTR32 Posted September 20, 2010 Share Posted September 20, 2010 Or depending on the size of the hose just get a small breather filter for it, like the one below. its way too small for one of those. the na ones are different to turbo, the turbos dont have that lil hose thing. if ur gonna run a pod filter, try to get a box around it (the just jap ones are cheap and look nice too) and get a cold air intake on it from the standard cooler piping hole (if u have an aftermarket cooler with a hole drilled) i dunno if n/a's have this hole though. Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5455862 Share on other sites More sharing options...
guanyyr34 Posted September 20, 2010 Author Share Posted September 20, 2010 its way too small for one of those. the na ones are different to turbo, the turbos dont have that lil hose thing. if ur gonna run a pod filter, try to get a box around it (the just jap ones are cheap and look nice too) and get a cold air intake on it from the standard cooler piping hole (if u have an aftermarket cooler with a hole drilled) i dunno if n/a's have this hole though. I'm gonna make a custom cai n box off the poddy but there is not hole from the standared air intake so will have to drill my own.. I'll get to it this w.e Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5455883 Share on other sites More sharing options...
GUN_METAL_GTR32 Posted September 20, 2010 Share Posted September 20, 2010 i really dont advise drilling a big f**k off hole in ur engine bay buddy. but thats up to u Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5455947 Share on other sites More sharing options...
starwarz Posted September 20, 2010 Share Posted September 20, 2010 i really dont advise drilling a big f**k off hole in ur engine bay buddy. but thats up to u LOL at your comment, im my opinion its not worth putting a hole in your engine bay for a stupid pod that wont give your car any results on a dyno or on the street, i suggest he does what i did i took of my pod because its useless put my standard box back in went to the guys at Justjap and got a apexi panel filter, its easy, its effective and it keeps the cops off your back. Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5456586 Share on other sites More sharing options...
stump_69 Posted November 21, 2010 Share Posted November 21, 2010 When i bought my r33 it had a pod on it and i replaced it with a k&n pod, and one of the just jap boxes, the car still ran sluggish from the pod even with cold air because its sucking more air then its ment to, and my fuel/air gauge was saying it was running lean aswell ALSO i got defected with the just jap box on, they cops didnt give a F%$# so i found a stock box with the standard cold air snorkle with a flat panel k&n filter and its been going like a dream, i highly advice against drilling holes in the body and pod filters Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5559034 Share on other sites More sharing options...
Keith w Posted November 28, 2010 Share Posted November 28, 2010 If there is a vacume hose connected to the box, its gonna be there for a reason. If there is a lesson to be learnt (and I have) with high tech engines like the rb25 neo that the engineneers that made the engine are pretty good at their job. You could drill a tiny hole in the base of the pod and silastic in a small holow tube that the vacume line will fit. I done that. Or, if you want an awesome sound to come from the air intake, leave the panel filter in place and just remove the intake snorkel and about 3800-4500rpm the induction noise will be louder than your exhaust, I've done this and it is still like it today and completley legal and sheilded from engine bay heat. Try it and see how you go. Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5570239 Share on other sites More sharing options...
central coast person Posted December 1, 2010 Share Posted December 1, 2010 dont get a pod filter, just keep your intake stock and get a hi-flow panel filter. Your ecu and sensors will like that more. Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5574876 Share on other sites More sharing options...
Keith w Posted December 1, 2010 Share Posted December 1, 2010 I'll aggree with that and the car will go so much better with the panel filter over the pod. And the hose that goes to the air box before the air flow meter is a air intake temp sensor (I think?). Link to comment https://www.sau.com.au/forums/topic/337279-help-iwth-pod-filter-in-an-r34-gt/#findComment-5575542 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now