Jump to content
SAU Community

? For Anyone With An R32 GTS-T

Zushi
 Share

Recommended Posts

Zushi Contributor

Zushi

Posted
Posted

Hey, I'm looking for someone with an R32 GTS-T that might be able to help me with some questions. I have a set of front knuckles and hubs off of a 4-door R32 Skyline GTS-T. I have the suspension for to fit it but I can't figure out where the suspension hooks up to. I think I'm probably missing a the upper links. I'm just not sure exactly what the GTS-T set-up looks like. If anyone can help me out with pics or something that'd be cool. If you can help me out with any of this, let me know. Thanks.

Link to comment
https://www.sau.com.au/forums/topic/33752-for-anyone-with-an-r32-gts-t/
Share on other sites
Zushi Contributor

Zushi

Posted
  • Author
Posted

Hey, I went all over that site and couldn't find anything that gave me enough info. Found pictures of the actual suspension but not of the upper links, lower links...the knuckles...etc. do you have a gts-t? i was hoping to find someone with a gts-t who could take a picture for me or something. well, let me know. Thanks.

Sydneykid Grand Master

Sydneykid

Posted
Posted

Hi Zushi this is the pricture of the front suspension on an R33 GTST from the Whiteline site. The only difference between it and R32 front suspension is the upper control arm. On the R33 it is a wishbone..

R33 GTST front suspension

The upper control arm on a R32 looks like this instead of a wishbone, This is an adjustable one, the standard item does not have the bolts and the slots, it is fixed in length.

R32 upper wisbone

This is a picture of R32 front suspension

R32 front suspension

Hope that helps some more

Zushi Contributor

Zushi

Posted
  • Author
Posted

hey, thanks for the help. i can't really tell exactly what im missing though. the only pieces i have are the knuckles, hubs, and of course calipers. what im trying to do is convert my s13 silvia from 4 lug to 5 lug using the pieces i got off of a 4 door r32 skyline gts-t. the rear knuckles were a straight swap and pretty easy. the front though i need more pieces. just trying to figure out which pieces im missing. i know i need the upper link pieces that go from the knuckle to the suspension....right? will i need a lower link? if you can help me out with the info i need on this swap thatd be awesome. well, get back to me. Thanks.

Sydneykid Grand Master

Sydneykid

Posted
Posted

Hi Zushi, why didn't you ask this in the first place?

An S13 has Machpherson struts, it is not double wishbone like a Skyline. (ie; they have no top arm). The shock absorber is the top arm on an S13.

To fit Skyline front brakes and hubs you remove the disc and rotor and the hub and fit it to the S13 strut. There is probably some trick with the wheels bearings. You don't use the Skyline upright at all.

If you need more info than that I suggest you try the Silvia forums they have more experience with what you are doing than a Skyline forum.

Hope you succeed.

Sydneykid Grand Master

Sydneykid

Posted
Posted

No Zushi, all you use from the Skyline is the brake callipers, brake discs and hubs. All the rest of the Skyline bits won't fit a Silvia. You need the Silvia struts and lower control arm. There is no upper arm on Silvias.

The Silvia forum guys will have photos of Silvias with Skyline hubs, discs and callipers. Ask them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • blind_elk
      Wheel refurb?

      By blind_elk · Posted

      The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Bit wet, but YUMMY
    • GTSBoy
      Pops when backing off throttle, rough-ish sound through rev range.

      By GTSBoy · Posted

      Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • Duncan
      Pops when backing off throttle, rough-ish sound through rev range.

      By Duncan · Posted

      It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • AdiR34
      Pops when backing off throttle, rough-ish sound through rev range.

      By AdiR34 · Posted

      Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...