Jump to content
SAU Community

Recommended Posts

Hi i have a r32 which i bought with a ticking sound and the previous owner told me it was lifters and it will go away with the right oil, i have now tryed a few good oils latest being 8100 motul, i am now suspecting it might not be lifters and might be the injectors as he told me the car was well looked after and ive found hoses dissconnected, spark plugs in poor condition vacuum hoses still from when it was original, leaking coolant hoses etc so i cant really take his word for it being lifters.

So would lifters and failing injectors make the same type of ticking sound?

When the car is not completely warm and i drive off i get a kind of whistling noise at the same time as the intake suction noise then when its warmed up the cars sound and performs good.

Any insight to this situation will be much appreciated

Cheers

Link to comment
https://www.sau.com.au/forums/topic/337629-injectors-or-lifters-ticking/
Share on other sites

lifters will tick if the oil hasnt been changed regularly, as old oil sludge gets stuck in them and stops them from performing as they should

injectors tick normally, in fact, a nice injector tick shows signs of good health in the injectors

you will tell the difference as you will hear the lifter tick from inside the cabin, you wont hear injector tick inside

if its your lifters that are ticking, new oil wont fix this, you need new lifters, or you can do the tedious task of taking them out, pulling them apart and cleaning them, i recommend just getting some non genuine lifters, as genuine ones will cost you your left testicle.

Hi i have a r32 which i bought with a ticking sound and the previous owner told me it was lifters and it will go away with the right oil, i have now tryed a few good oils latest being 8100 motul, i am now suspecting it might not be lifters and might be the injectors as he told me the car was well looked after and ive found hoses dissconnected, spark plugs in poor condition vacuum hoses still from when it was original, leaking coolant hoses etc so i cant really take his word for it being lifters.

So would lifters and failing injectors make the same type of ticking sound?

When the car is not completely warm and i drive off i get a kind of whistling noise at the same time as the intake suction noise then when its warmed up the cars sound and performs good.

Any insight to this situation will be much appreciated

Cheers

RB20 or RB26?

Ive done close to 6 oil changes since i purchased it in july this year so its not old oil, i have 8100 motul in it at the moment.

Also i do hear it from inside the cabin, so it is more than likely lifters? I do get various oil pressure readings when driving and idle.

The whole reason is so i can get this ticking fixed as i doubt its doing any good for the car. The ticking is not around on idle only when driving, or under load

lifters will tick if the oil hasnt been changed regularly, as old oil sludge gets stuck in them and stops them from performing as they should

injectors tick normally, in fact, a nice injector tick shows signs of good health in the injectors

you will tell the difference as you will hear the lifter tick from inside the cabin, you wont hear injector tick inside

if its your lifters that are ticking, new oil wont fix this, you need new lifters, or you can do the tedious task of taking them out, pulling them apart and cleaning them, i recommend just getting some non genuine lifters, as genuine ones will cost you your left testicle.

I was actually doing this today and the ticks were gone for a split second then would come back slightly on idle but barely noticable whilst on idle

to test if its the injectors, race the engine from the engine bay and as soon as you let go, the injectors should stop ticking momentarily

This i never thought of but does make sense abit, as i stated in my first post id get a whistling type sound when the car hasnt warmed up, the noise would seem to come from the passenger side of the engine bay but when im under the hood on idle and put load on the throttle i cant seem to get that whistling noise to come through, instead i here the ticking coming from around where the injectors are. The r32 doesnt use any oil or blow smoke so i never thought it could be the turbo

I wish i could explain exactly what the noise really is like but the best i can come up with is a weird whistling type sound, it almost sounds like a huge air deflection type noise as it would come through at high speeds through a small tube or similar

sounds like the turbo is on its way out / not getting sufficient oil etc

Also its a rb20det.

I just re read my post and they do seem abit mumble jumble, mainly because its a strange noise which im very unfamiliar with.

I originally thought it was a intake leak, as when i purchased the car it had a couple split intercooler piping hoses but changing them hasnt changed anything, ive also along the way found a fair few dissconnected hoses which ive either replaced or put back in, ive tryed the basics to eliminate the problem but so far no good.

Sorry about the multiple posts, but in my previous cars ive done injector upgrades and have never heard noise from the injectors wether it be stock or the upgraded ones.

injectors tick normally, in fact, a nice injector tick shows signs of good health in the injectors

Anyone got anymore insight to this situation? I am thinking it is lifters but cant explain wether the lifters will make that whistling noise, i do get clicking whilst driving which does sound like from inside the engine

Sorry about the multiple posts, but in my previous cars ive done injector upgrades and have never heard noise from the injectors wether it be stock or the upgraded ones.

i stand by my post

I think we are on the right path, ive started to pay attention to the boost guage when it does this noise and it is before it hits zero psi, so off boost and when its cold is when the whistling noise comes on, and it does sound like a squealing noise aswell, would the hose to the waste gate not being on the tight cause a similar noise? It goes after warming up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Talk to hot girls via live cam. Adult dating made easy and exciting. https://secrelocal.com private ladies for discreet encounters
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
×
×
  • Create New...