Jump to content
SAU Community

Recommended Posts

Hi all,

I've recently been lucky or maybe unlucky to some. My dear brother has purchased for me an R32 gtr from an auction house in QLD and has repaired all panel work and resprayed it as well for me. It's a very nice gift from him indeed but he said that the car's alignment is off so I will need to re get it done. Thinking that this was all I needed to get done before I could get it re registered in NSW and come along to the 10/10/10 cruise with SAU members but this no longer seems to be the case.

First I got it to the wheel alignment shop, they put it on the hoist and straight away they said that if you want your car to drive straight you need to replace this left hand side castor rod as it was bent. So no problem I set off and found myself some nice adjustable cusco castor rods, i installed them then went back to the wheel alignment shop. They spent some time adjusting and adjusting then they said, somethings not right... the caster seems to be fine but because they couldn't really adjust much camber with the stock camber arms, they said that the car will still pull to the left due to the camber on the left hand side although it will be much better than it would be before. So again slightly confused as to why but no problem I set off to go get those pivoting adjustable camber arms from UAS then went back and got them installed and to get another alignment done. Thinking this was going to be all good and having the thought of the car driving true and straight again was making me smile. But then..... the camber got worse but the castor got better! They weren't sure either because the after market camber arms were in fact shorter therefore logically the problem with having positive camber of the left handside should of been corrected. So currently now were at a point that we think the car is bent on the left hand side some where. I've had a suggestion of going to get it on a chassis jig test and see whether the car is true and straight, so I went of to a local Body repairer panel beater but after hearing it was a japanese import they were reluctant to touch it and they were talking big numbers already. What do you guys suggest? is there a chassis straightening place you guys recommend in sydney, hopefully south west but if not no problem? Below are the results from the wheel alignment..

After installing castor rods (After installing camber arms):

Rear axle

Camber

Left: -2.03 (-2.06)

Right: 0.04 (-0.26)

Toe

Left: -0.12 (-3.9)

Right: 0.13 (0.7)

Front axle

Castor

Left: 2.22 (5.34)

Right: 4.22 (6.01)

Camber

Left: 0.08 (0.21)

Right: -1.59 (-0.23)

Toe

Left: 0.41 (0.3)

Right: 0.52 (3.1)

Also to avoid making another post in this section, i thought i might as well add it in here since its already a long post. Second problem that was really conscerning me was the brake pedal. It felt really mushy, light and not very good a braking so I did the first check of looking at the pads to see if there were any left. No problem pads were fine as well as discs. Next check was to check fluid levels, was a bit low, so got them bled and refilled. This actually help the pedal feel alot more but honestly i don't think this is the way its suppose to feel, its still got that initial slow down bite as soon as you step on it but then it dosen't really do too much more after that and if you want to wipe down a bit of speed you pretty much have to put that brake pedal down to the metal. I've had thoughts that it could be the brake master cylinder, any other thoughts?

I'd like to thank you for taking the time and reading the post and I also will appreciate any input. Thank you

Cheers,

Ken

Link to comment
https://www.sau.com.au/forums/topic/337783-advice-needed/
Share on other sites

  • 4 weeks later...

check that they are tight,

any good mechanic can rebuild calipers, its just new seals and pulling apart cleaning and reassembling.

if your car is bent just get adjustable everything so you get the alignment etc good, much cheaper then trying to straighten the chassis

Link to comment
https://www.sau.com.au/forums/topic/337783-advice-needed/#findComment-5518699
Share on other sites

if the car is bent, which it sounds like it probably is if it was bought damaged from an auction............... sell it and don't tell anyone

calipers are fairly easy to rebuild yourself, i just did mine on the weekend.

protip if you decide you're going to paint the calipers too, do the painting on the car because proper brake caliper paint only cures properly at high temps so it might feel dry when you touch it but you make a mess when you pick it up

Link to comment
https://www.sau.com.au/forums/topic/337783-advice-needed/#findComment-5518736
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...