Jump to content
SAU Community

Recommended Posts

hey guys,

I've decided to pack up shop and head overseas for work and study. So i'm selling my car, and all parts that i had built up ready to upgrade the beast.

Photos will be coming tonight, but here's the list as it stands now.

Hypergear High-Flowed RB25 Turbo (i believe its a Tr43?), $500

ECR33 PowerFC ECU, $900

Z32 AFM with plug, $200

R34 SMIC, $150

8 x S15 (480cc) injectors (on s15 rails), $400

R33 Side Skirts (white), $120

R33 S2 Front Seats with rails, $100

Apexi power intake (pod filter, barely used), $50

HKS mushroom pod filter, $50

R33 weather shields, no clips, $50

That's all I can think of for now, I'll add more as i go through my garage.

As stated, also selling the car :Ohere

Pics will be added tonight.

I can be contacted via PM, or shoot me a msg 0415 795 920

cheers

Link to comment
https://www.sau.com.au/forums/topic/337896-quarkguns-liquidation-sale/
Share on other sites

Hey mate,

The power intake fit the r33 intake fine, i didn't need an adapter to fit it anyway. Not sure about the s15 though... if the intake size was the same then it should fit

hey mate, yeah its a direct replacement for rb25det engine, but i believe you need to replace the oil feed line (~$50) or remove the restrictor in the stock oil line. that's according to my research, i never went ahead with installation so i didnt get around to getting a new oil line.

A couple of ppl have asked me about the turbo, so FYI,

The turbo was bought of a fellow sau member, who told me that the turbo had done only 3000kms, so still pretty young. I'll post up pics tonight to show condition.

Hey Guys,

here are the pics, any questions pls let me know.

Turbo:

skylineparts008Large.jpg

skylineparts007Large.jpg

skylineparts006Large.jpg

skylineparts005Large.jpg

skylineparts004Large.jpg

AFM:

skylineparts003Large.jpg

S15 INJECTORS:

skylineparts002Large.jpg

HKS POD:

skylineparts001Large.jpg

APEXI POD:

skylineparts014Large.jpg

POWER FC:

skylineparts017Large.jpg

skylineparts018Large.jpg

DUAL GAUGE PILLAR MOUNT (shown with shadowed gauges)

Only test fitted, but sits perfectly flush on the r33

skylineparts012Large.jpg

skylineparts011Large.jpg

AUTOGAUGE SMOKED LENS GAUGES (BOOST-PSI & AIR/FUEL RATIO)

skylineparts015Large.jpg

USB CONSULT CABLE:

skylineparts016Large.jpg

PINEAPPLES (Subframe Alignment Kit):

skylineparts009Large.jpg

GREDDY GAUGE PILLAR MOUNT:

skylineparts010Large.jpg

SIDE SKIRTS:

skylineparts023Large.jpg

FRONT GRILLE:

skylineparts020Large.jpg

Added some parts:

Front Grille, $50

Greddy Gauge Mount, $30

Pineapples, brand new unused, $100 ($137 from whiteline)

USB Consult Cable + my nisdatascan license, $80

AutoGauge Gauges, new and unused, includes all necessary wiring, $25 each

Dual Pillar Gauge Mount, $30

I think that's about it. Thanks guys.

Hi dude, very interested in the z32 and injectors.

Have you had the injectors flow tested, and what can you tell me about them?

I was going to SMS you but it's 1am an I didn't wanna wake you up.

I'm on the gold coast, could you arrange for postage? I don't need the rails.

Also interested in the gauges and dual gauge pillar mount. What psi does it read up to?

My number is 0421517163 if u prefer SMS :blink:

Hi dude, very interested in the z32 and injectors.

Have you had the injectors flow tested, and what can you tell me about them?

I was going to SMS you but it's 1am an I didn't wanna wake you up.

I'm on the gold coast, could you arrange for postage? I don't need the rails.

Also interested in the gauges and dual gauge pillar mount. What psi does it read up to?

My number is 0421517163 if u prefer SMS :blink:

i've sent you a PM

Guys, i need to issue a clarification on the turbo.

I've spoken with Stao from Hypergear (thanks Stao) in order to properly identify the turbo. he informed me that it is not suited for a rb25, rather it is a 2006 TR43 turbo suited for RB/SR20, and will produce approx 230rwkw. So, i'm glad I found that out before selling it, but yeah, i'm annoyed that i was sold the wrong turbo to begin with.

So, if anyone wants to upgrade their r32, silvia, 180sx or 200sx turbo, or your fully sick pulsar!, then this one is a good buy :rofl:

Price stands at $500

Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...