Jump to content
SAU Community

Recommended Posts

Ladies and Gents, it's time that SAU:NSW throw another Social event.

We've recently held a successful evening out for our members with a few games of laser-tag followed up with a ghost tour, all of the people who came along had an amazing time, their only question? When's the next social event?

When??? Well the answer is OCTOBER 31st!.

What are we doing, I hear you ask??? Well we're taking a nice cruise from Kirrawee down to Headlands Hotel in Austinmer.

From where, and what time are we planning to leave??? Well we're meeting up at 10AM, for a 10:30AM Sharp leave, at the parking lot near the corner of Waratah St and Bath Road in Kirrawee.

55099d12.jpg

Where to then? Well, we head left out of that carpark to Toronto Parade, turn left, and follow this down to the Princes Highway.

After travelling down to the Princes Highway, we hang a right heading for the Royal National Park turn off at Sutherland.

post-31588-1285839628_thumb.jpg

As we near the National Park at Sutherland, we need to turn left down Farnell Ave. Once we turn here, there will be a bit of room on the left where we can pull over and get everyone to bunch back up.

post-31588-1285839620_thumb.jpg

As we head into the Royal National Park, we'll be informing the "Gatesmen" that we are not stopping in the National Park and travelling through to Wollongong. (Which we are, into a northern Suburb of Wollongong). This means we don't have to pay to go through.

From here we just shoot through the Royal National Park and pop out down the bottom at Bald Hill.

After Bald Hill, we will be taking the left turn down Lawrence Hargrave Drive.

post-31588-1285839636_thumb.jpg

We will follow Lawrence Hargrave Drive down until Headlands Ave, at which point we will turn left, and pull into the carpark at Headlands Hotel.

post-31588-1285839609_thumb.jpg

Now this hotel does have some "Down Under Hollywood Class", being the main on-site filming location for the Australian Show headLand

pub_2173.jpg

There is plenty of park land around the Hotel, and after a bit of a feed, I will be proposing a bit more socialising and some fun activities (Weather permitting)

If the weather does fault, then we'll just stay inside, have our chats, and shoot some pool.

On this cruise we will ALL be sticking to the speed limit.

There will be NO DRIFTING.

NO BURNOUTS

NOTHING ILLEGAL!

We will be the most courteous users on the road, and we will not be doing ANYTHING to cause any disrepute for the club.

As with all SAU:NSW events, this cruise will run under a CAMS permit.

This will be another fun day, with the only cost a bit of fuel, and what ever you decide to eat and drink.

For those of you who decide you need more than one or two during the afternoon, please organise a safe way home.

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

... sounds like a top day ... if im not working ill go ... :( ...

... its been a while since i drove through the national park ... does it still have those little "causeway" dips in the road to let excess rain run off ... depending on that ill either take the R33 or micra ... :/ ...

... cheers malcolm :) ...

... sounds like a top day ... if im not working ill go ... :( ...

... its been a while since i drove through the national park ... does it still have those little "causeway" dips in the road to let excess rain run off ... depending on that ill either take the R33 or micra ... :) ...

... cheers malcolm :) ...

Hey Malcolm, they've recently resurfaced the top half of the National Park, and it's nice and smooth up there, the bottom section is still the "old" road that's been down for at least the last 3 years (With a few new sections)

I've never come across these "causeway" dips you mention though, only the surface starting to become uneven from subsidence.

The R33 should be perfectly fine to go through there, I used to take mine through their on the old road all the time and never had an issue (And it was quite low back then!). If you scrub or scrape out, then you're probably already heading for a tree, and as this is a general casual sunday cruise, this will be very relaxed and easy on the car.

Hey Malcolm, they've recently resurfaced the top half of the National Park, and it's nice and smooth up there, the bottom section is still the "old" road that's been down for at least the last 3 years (With a few new sections)

I've never come across these "causeway" dips you mention though, only the surface starting to become uneven from subsidence.

The R33 should be perfectly fine to go through there, I used to take mine through their on the old road all the time and never had an issue (And it was quite low back then!). If you scrub or scrape out, then you're probably already heading for a tree, and as this is a general casual sunday cruise, this will be very relaxed and easy on the car.

... hi matt & thanks for the "special stage" notes ! :P ... maybe im imagining those dips in the road or they were somewhere else !? ... ill try my hardest to show up ... im a freelancer in the film industry & we never know what we're doing till we're doing it ... im working this sunday & will miss out on katoomba so ill be more than peeved if it happens again ... fingers crossed ... see you on the day ... cheers malcolm :rant:

On this cruise we will ALL be sticking to the speed limit.

There will be NO DRIFTING.

NO BURNOUTS

NOTHING ILLEGAL!

We will be the most courteous users on the road, and we will not be doing ANYTHING to cause any disrepute for the club.

... i cannot stress enough how much i agree with & support ALL of the above ...

... as ive mentioned before a 10 year old member of my family was killed in a parking lot while she was walking back from the shops by some moron who was showing off doing a burnout ... he lost control sideways mounted the kerb & the car rolled over & landed on top of her ...

... if youre a dickhead who cant help themselves & has to behave like a moron or if youre not a dickhead but think theres a good chance youll be a moron on this particular day ...

,,, STAY AT HOME ... :P ...

The R33 should be perfectly fine to go through there, I used to take mine through their on the old road all the time and never had an issue (And it was quite low back then!). If you scrub or scrape out, then you're probably already heading for a tree, and as this is a general casual sunday cruise, this will be very relaxed and easy on the car.

I've been through there a few times recently in the 33R and IIRC there *is* one section Malcolm at a river crossing (causeway) where the concrete does dip a little, and if you take it at, say 40km/h, your front splitter may kiss the tarmac (which I've done unfortunately :( ) so when you round the bend and see the causeway over the river, I'd drop it to about 20km/h or less.

Someone who does the road more frequently should be able to confirm / refute

I've been through there a few times recently in the 33R and IIRC there *is* one section Malcolm at a river crossing (causeway) where the concrete does dip a little, and if you take it at, say 40km/h, your front splitter may kiss the tarmac (which I've done unfortunately :down: ) so when you round the bend and see the causeway over the river, I'd drop it to about 20km/h or less.

Someone who does the road more frequently should be able to confirm / refute

If you're tempted to go through there that quick, you're tempting fate to end up in the cause way...

That cause way can get VERY slippery at times. The direction we'll be heading if you carry too much speed onto that causeway it will often end in understeer, and it's only a narrow crossing really!

Just so you all know, I'll be coming UP through the national park before the cruise as well to take note of anything that is out of the ordinary (For the RNP anyway!)

Just so you all know, I'll be coming UP through the national park before the cruise as well to take note of anything that is out of the ordinary (For the RNP anyway!)

Once went through there at night and came across a couple of *deer* standing in the middle of the road. :blush: Was foggy too, crazy stuff.

RNP definitely requires keeping eyes peeled and wits about, even more than usual.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...