Jump to content
SAU Community

Recommended Posts

to OP. cefiro genuine piping fits best. anything else will need slight modification. if you're doing de plus T..

Trust me from experience. Get an r34 smic. Don't sleep eat or piss until you get one. Don't waste time with a31 smic not worth it.

De+t setups run best with r34. It's big but small enough to retain boost response. And to all naysayers. It's plug and play with a31 piping.

Richard, get a core. ive got lots of s13/r32 piping we can make it work dude? if not we can weld them up????

cheers for the replies guys, ive found a cooler but havent bought it yet, if you've got piping and connectors, oooh yea i want them

can we do deals on sunday?

R32 pipes need to be cut down a bit.

I've got a Cefiro SMIC, brackets and pipes which I don't need if I go ahead with buying a halfcut (either tomorrow or Monday).

We can make a deeeaaal yeah ?

Dammit why do you have to be in Perth right now,

from memory R32 SMIC piping dont fit, I was chasing up the piping at one stae and thought to go R32 but the holes through the chassis were in a

O not a O configuration, the piping was quite different.

O O

You'll have a better chance with R33 piping so long as you have the turbo to cooler pipe for the 20 as the 20 turbo has a smaller outlet.

cheers for the info, I got a R32 one and pipes and they seemed to fit up ok, I didn't want a FMIC I will if I upgrade the hairdryer

the reason it would be a good idea (or most people do) get a larger intercooler is because the factory intercooler is very small and suffers from heat soak really bad (it's more like a interwarmer , theres nothing cool going through there after a 20 min drive , especially through summer) which is why people were suggesting to buy a fmic , even a small one :( . try his: get some vacuum line and re route the back window squirter line to the intercooler with a garden spray squirter at the end of it (aim it to spray over the core as much as possible) , next hot day after driving it wherever and getting it up to temp for a good 20 min , hit the sqirter button and see/feel the difference it makes :)

I know it makes a huge difference, I had a doozy on my old RB25 VL commohore, the fmic will find its way onto mine soon, I just needed the car back on the road, its a wonder the humble RB20det, I remember when they used to be the fastest thing ever 10 years back, not so much now, but its better than the DE it had, god im glad thats gone

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be determined, Luke, to be determined. 😁 Definitely the car
    • It might be worth having a good look at the chassis behind the bumper then; most people prefer the series 2 look so it might have been changed to cheaper parts as part of an earlier repair
    • The car itself a series 2. I was just curious about the headlights and just wanted to confirm that they were series 1. Good to know the rest of the front end is series 1. It’ll be easier for me to find parts on the aftermarket side of things lol
    • If you've wired up the coils & injectors properly, & have the neo CAS loom for the trigger, it should all work. The VCT works the same way so just different plugs between s1 & neo. Assuming DBW if no IAC. Don't bother with the stock boost solenoid with g4x.
    • THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
×
×
  • Create New...