Jump to content
SAU Community

Recommended Posts

My car is having issues where sometimes the rev's would just fluctuate by itself and then eventually just cut off (while driving or on idle). I would try to start it up again and it would crank the first 2 times, then eventually nothing would happen when you turn the key (no click, no sound at all).

To get it running again i'd have to get it jump started, then it would run fine.

It's died 3 times already, the past 2 times have been when i've just been on idle but one time it just completely turned off while in the middle of driving.

What could be the problem? any suggestions?

thanks

Edited by tehbebe
Link to comment
https://www.sau.com.au/forums/topic/339974-r33-gtst-cuts-off/
Share on other sites

just remembered as well, when i turned the A/C on (While i was idling), the revs would start fluctuating, would that still be the AAC valve?

and thanks for the link ill check it out :(

i had a stuffed air con compressor and when the car was idling the revs would continuously hunt up and down from 1000 to 500 with the air con on. Air con off it was totally fine. Scrapped the air con compressor, bought a second hand one and runs like a dream now.

This fixed my problem, but sounds like yours cutting out might be more than just this.

  • 2 months later...

my idling is fine now, no problem in fluctuation in revs, but brings me to another problem, after my car has been driven hard, or given instant high revs, or pretty much when it starts to get warm, it just dies on me. If i go to start it back up, it just clicks, it wont start up on me again, eventually if you keep trying to start it up it will eventually die and you wont be able to start it up again unless i get jump leads... but here's the thing, if you pop the hood, let it cool down for about 20 minutes, it'll start up again no problem.

ANY ideas?

if it just clicks it usually means your starter is stuffed. not sure y it wove stop your car tho. does it try and turn ova when you turn the key or does it just tick. sorry bout the last post didn't read yours properly.

  • 2 weeks later...

it still clicks when it dies out but eventually if you keep cranking it, it won't even click at all.. although if i let it cool down on the spot without trying to start it up, eventually it'll start again fine. it only seems to just die on me in hot weather or once ive really 'driven' it. :(

Check simple things like your battery, your earth etc.

Could be a dodgy earth somewhere. Heat creates more resistance

Or could be a couple issues, check cas and afm (check the wiring to the plug as well)

+1

Sounds a bit like an earth problem as the symptoms come and go and affect hot-starting and make it cut out.

Could also be your alternator... Got a volts gauge or one you can hook up? If your getting a flat battery while driving (which seems to be what your describing), it'll cause these symptoms...

it definitely sounds like a battery/alternator issue to me as well. this doesnt mean that either are stuffed, you just need to check your terminals properly.

first thing i'd try is a separate earth from the alternator housing to the chassis and see where that gets you. try use a thick earth wire for this. then try the earth on the battery. if thats no good then get someone who knows how to use a multimeter to test your alternator and battery.

it definitely sounds like a battery/alternator issue to me as well. this doesnt mean that either are stuffed, you just need to check your terminals properly.

first thing i'd try is a separate earth from the alternator housing to the chassis and see where that gets you. try use a thick earth wire for this. then try the earth on the battery. if thats no good then get someone who knows how to use a multimeter to test your alternator and battery.

+1

You'll need to check them while the car is breaking down/driving/under load though, as if it sits and idles ok most of the time then testing the alternator then might not tell you anything...

thanks guys, for the updates... the battery and starter/alternator is one of the first things i checked out aswell since thats what i thought it was in the beginning, some guy checked them with some stick thingy lol and said they were fine and it was "charging properly" then he was like "i dont know much about jap cars, take it to some jap place" so i was like okay cool..... lol

i changed my AFM, cleaned AAC, changed fuel pump and fuel filter.. now i was hitting constant boost while driving home one day and it cut out again, this time cos i was on a main road and by myself i just left hazards on while waiting for a lift to help me out cos usually like i said, if i let it cool down for a good 20 mins - sometimes an hour i can start it up again.. but this time it just completely died on me, so the hazard lights eventually let my car to die, some random came and jump started me and i was able to get home fine.

i can drive the car fine, as long as i dont hit constant boost other wise it will cut out. im gonna try look into buying another alternator and see how that goes, if all else fails, ill try a new battery, umm im gonna also unblock my BOV and just put a proper gasket with a hole in it instead of the plate i have. just a thought.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was under the impression the reason why OEMs are going with solutions like relatively thin "right-sized" cylinder walls with technologies like PTWA and open deck is because they care a lot about whatever marginal knock margin benefits they get from that vs the structural rigidity benefits of a closed deck block and thicker cylinder walls. I also see some weird stuff like plastic inserts in the water jacket around the cylinders to try and equalize cylinder wall temperatures. re: the PRP blocks and heads at the end of the day it's hard to know what is and isn't going to work there, just have to see what the initial buyers say about it.
    • Which is why I didn't mention that hardness testing, and specifically mentioned the bore and deck thickness testing. Yeah, not really. The bore temperature will be a lot more even around the top half inch or so, where the material distribution is dominated by the deck, and which is the only place where the bore surface temperature heating any gas in the cylinder is likely to have any effect on detonation. Think about it. Another inch or so down the bore, you might have a hotter spot. The gas there might get a bit hotter, then the piston rises squeezes that gas away from there at high speed and mixes it with other gas from nearby. Instant dilution of the problem. I'd be surprised if it was an issue at any time other than in racing engines or OEM dev engines being run at the ragged edge of tuning. Say what now?
    • https://dsportmag.com/the-tech/education/engine-tech-material-hardness-testing/ The PRP testing on block hardness I'm not sure how much it actually can be trusted. The thinner cylinder walls on RBs is a bit of a problem vs 2JZ but it really depends on the design goal. Siamesed cylinder bores like a 2JZ cause uneven cylinder wall temps too, which means a bit of distortion induced by that + the hotspot can affect knock margin. Something that actually gives me a bit of pause with the PRP block, whether super thick cylinder walls are going to keep it from being drop-in compatible on an otherwise OEM rebuild. 
    • Yeah very valid point. I am waiting for one of the other tuners to come back from vacation so he can help me a bit when the cat is installed again. In the meantime I am going to finish up my polishing and ceramic coating that I have started myself.    N45 Dr Beasley product is highly recommended for a paint primer / polisher. Using this EXO Gtechniq also for the ceramic but next time might use the light serum before hand also. Looks great. 
    • Running rich in conditions where it shouldn't probably won't do great things for catalytic converter lifespan. I would fix that sooner than later.
×
×
  • Create New...