Jump to content
SAU Community

Recommended Posts

hey i have a r32 with and rb20det 5spd and im having over fueling issues, well i was ......

my standard ecu was over fueling under 14psi of boost and didnt really bother me n after u give it a flog you could smell petrol and i thought who cares at least its not running lean.

but then i bought a re-tuned kaikimoto ecu that re tuned fuel and ignition timing and took of speed limiter etc. so plugged it in and took it for a drive and it wasnt over fueling and seemed the same or slightly less then standard ecu.

thought that was weird a standard computer doing that, has anyone encountered this problem before?

mods to my car are 3inch exhaust,fmic, hks air pod filter, 14psi. (ecu tuned for these mods)

had standard spark plugs so replaced with irridiums and same result.

thinking of putting standard ecu back in as i dont know if re tuned ecu is making it too lean or not

any help would be great

Link to comment
https://www.sau.com.au/forums/topic/340156-rb20det-overfueling/
Share on other sites

the standard ecu is tuned to be rather rich. this is safer than a leaner ecu and is better for a more universal use. it allows a bit of head room for if the fuel filter gets a bit blocked, injectors get a bit fouled or the fuel pump plays up.

if the ecu wasn't retuned whilst fitted to your car it won't be much better than the stock ecu, even if it was tuned for a car with the same mods.

the best thing to do is to put the car on a dyno and get them to check the AFR's. it will tell you how rich it is running. if it isn't that rich but you still have a fuel smell, then it could be that your cat converter is shot (empty) and this often increases the amount of fuel smell you get.

i have the same issue, very strong fuel smell after just moderate acceleration, even just dailying i get fuel smell, running 8 pound, stock everything, apart from zorst, fmic and splitfires, my cat is new so its not the problem as mentioned above, the only thing i can put it down to is a fuel leak in the engine bay and a bad one at that, but i cant seem to find any issues in the lines anywhere and my fuel usage is normal, it has a new fuel filter and ive checked the lines to it to.

:S

hey thanks, i just went back to stock ecu to be safe cause of running 14psi. however before i did this i wanted to see if the ecu was really chipped and speed limiter was removed so tryed going over 180 and nope it had limiter n hit the limiter twice and now its playing up. went back to standard ecu and same issue occurs.

when you get on boost flat throttle at about 4-5grand all way to redline it makes rapid misfire type sounds and bogs down?

could the ecu have done something or does it sound completely different

sitting on the limiter possibly fouled up the plugs or overheated the coils. try a new set of plugs and see what happens

also, there is an easier, more legal way to see if the ecu has been chipped. you can usually tell just by opening it up.

sitting on the limiter possibly fouled up the plugs or overheated the coils. try a new set of plugs and see what happens

also, there is an easier, more legal way to see if the ecu has been chipped. you can usually tell just by opening it up.

kool, i'll try that.

didnt want to open it because it has wax seal things holding the covers on and didnt want to break the seal incase i needed to refund it.

i really hope its spark plugs

kool, i'll try that.

didnt want to open it because it has wax seal things holding the covers on and didnt want to break the seal incase i needed to refund it.

i really hope its spark plugs

was spark plugs the iridiums blew up haha surprised it still idoled the gaps were like 2 or 3 mm haha

cheers for the help

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...