Jump to content
SAU Community

Rb25det Engine Parts, Head, Pistons,sump,plenum & Other Engine Parts

Bris33

By Bris33,
in Classifieds

 Share

Recommended Posts

Bris33 Explorer

Bris33

Posted
Posted

Parts for sale in coopers plains Brisbane 4108.

Came from a car I purchased from a friend who blew the engine by upping the boost and not tuning it, and through a con-rod out the side of the block.

The head comes with a one month money back guarantee if its found to be cracked or not usable. There are slight marking on one of the cylinder have a look in the very detailed pics on the link, shouldn't affect the function of the engine.

The sump has a very slight dint which with a gentle tap should be able to be brought back to perfect.

One of the 5 pistons has a slight mark on the back of it, there is a pic of it also, the other 4 look to be in perfect condition.

Any questions best to send it to [email protected] for a quick reply, or phone 0424631188.

Pics of engine parts RB25DET - this is the link to high quality pics.

Rb25det head, valves, and cams $200.

Upper and lower plenum and throttle body $100.

Cam covers $40.

Crank sprocket $10.

Cam sprockets $40.

Oil pump $30.

Oil strainer $5.

Pistons $15 each.

Water pump $20.

Rear cam belt cover $10.

Sump good condition $50.

Rear oil seal housing $10.

Thanks for looking. :blush:

Bris33 Explorer

Bris33

Posted
  • Author
Posted
Parts for sale in coopers plains Brisbane 4108.

Came from a car I purchased from a friend who blew the engine by upping the boost and not tuning it, and through a con-rod out the side of the block.

The head comes with a one month money back guarantee if its found to be cracked or not usable. There are slight marking on one of the cylinder have a look in the very detailed pics on the link, shouldn't affect the function of the engine.

The sump has a very slight dint which with a gentle tap should be able to be brought back to perfect.

One of the 5 pistons has a slight mark on the back of it, there is a pic of it also, the other 4 look to be in perfect condition.

Any questions best to send it to [email protected] for a quick reply, or phone 0424631188.

Pics of engine parts RB25DET - this is the link to high quality pics.

Rb25det head, valves, and cams $200.SOLD

Upper and lower plenum and throttle body $100.

Cam covers $40.SOLD

Crank sprocket $10.

Cam sprockets $40.

Oil pump $30.

Oil strainer $5.

Pistons $15 each.

Water pump $20.

Rear cam belt cover $10.

Sump good condition $50.

Rear oil seal housing $10.

Thanks for looking. :blush:

Bris33 Explorer

Bris33

Posted
  • Author
Posted

Parts for sale in coopers plains Brisbane 4108. :)

The sump has a very slight dint which with a gentle tap should be able to be brought back to perfect.

One of the 5 pistons has a slight mark on the back of it, there is a pic of it also, the other 4 look to be in perfect condition.

Any questions best to send it to [email protected] for a quick reply, or phone 0424631188.

Pics of engine parts RB25DET - this is the link to high quality pics.

Rb25det head, valves, and cams $200.SOLD

Cam covers $40.SOLD

Rear cam belt cover $10.SOLD

Upper and lower plenum and throttle body $100.

Sump good condition $50.

Cam sprockets $40.

Crank sprocket $10.

Oil pump $20. - Price drop

Water pump $15. - Price drop

Pistons - $15 each.

Rear oil seal housing $10.

  • 2 weeks later...
  • 1 month later...
  • 4 weeks later...
  • 1 month later...
Bris33 Explorer

Bris33

Posted
  • Author
Posted (edited)

:cheers:UPDATE: PRICE DROP!!!!! :cheers:

Parts for sale in Coopers Plains Brisbane 4108. :)

The sump has a very slight dint which with a gentle tap should be able to be brought back to perfect.

One of the 5 pistons has a slight mark on the back of it, there is a pic of it also, the other 4 look to be in perfect condition.

Any questions best to send it to [email protected] for a quick reply, or phone 0424631188.

Pics of engine parts RB25DET - this is the link to high quality pics.

Rb25det head, valves, and cams $200.SOLD

Cam covers $40.SOLD

Rear cam belt cover $10.SOLD

Upper and lower plenum and throttle body $75 Price drop

Sump good condition $35 Price drop

Cam sprockets $20 pair, Price drop

Crank sprocket $10.

Oil pump $20. Price drop

Water pump $10.Price drop

Pistons - $10 each, Price drop

Rear oil seal housing $5 price drop

Edited by Bris33
  • 3 months later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...