Jump to content
SAU Community

Recommended Posts

need help from those who have or know bout polishing up an engine bay

ive had my licence suspended for 1month and since the car isnt goin no where

ive decided to polish all the alloys in the engine.

more to the point im using a orbital sander with 320grit paper on the pipe with the stock bov and having trouble getting it smooth all the way down, and am scared to use a thicker paper.

after this process i plan to use a 800grit then a 1200

im also plannng on doin plenum n engine

any suggestions on mayb goin about it a better way or added info on the matter??

also ive already done a search on the topic and it helped only to a certain extent

if anyone has pics it would also b great.

john c

Link to comment
https://www.sau.com.au/forums/topic/34038-polishing-engine-bay/
Share on other sites

It won't become smooth until you start using the other finer grade papers.. then it will start getting a lot shinier. Its hard work and takes many hours but eventually it'll come up.

Just keep going, sounds like you've got the right idea.

end result will do!

post em up

i done all this about 5 months ago. just used sand paper to get all the cast marks out of the alloy then used a polishing cloth on a bench grinder i used 2 stages on the polishing mop for the bench grinder , first a medium compound then fine/mirror. hope this helps.

i couldnt attach my pics cause they are already in a thread here. do a search or look for a thread tittled '' my new look engine bay '' all my pics are there.

here is mine: http://www.skylinesaustralia.com/forums/sh...ead.php?t=31877

.. over time the shinyness does tend to fade a little.

you can also use one of those buffer attachments for a drill and a decent polishing compound if you don't have a bench grinder.

Predator> ok so to sum it all up...you did

1. Sanded down any burs and crap (what grade papers you use?)

2. Polished (use anything specific?)

3. Repeated 1 and 2 until desired shinyness

4. painted (any prep work needed primers etc etc?)

this sum it all up? am taking notes

.. over time the shinyness does tend to fade a little.  

Autosol fixes that... ;)

I have a polished plenum, rocker cover and power steering canister.

It's a fair bit of work to keep it shiny, but it looks pretty :cheers:

Before and after pics of the engine bay can bee seen in the link under my avatar.

it takes a long time but the longer you spend the better it gets. you got the idea of steping down the grade papper, i use wet an dry. apply small amount of water or petrol to sanding surface or papper now and then. you should be able to get a polish finish just with sand papper, then when you buff with polish until black clean off with a new buff (clean cloth or buffer with no polish on it) and it will come up like mirra

Just grab a drill and a tapered grinding stone to start on the deeper areas and all the burrs, gently does it now, then use a flapper wheel attachment (coarse) on the drill then use a fine one with the scotchbrite in between. Then your choice is the buffing attachments for the drill or the bench grinder if lucky enough to own one. If buying a benchy then buy big and powerful NOW not later. Eventually you will have....

http://www.skylinesaustralia.com/photopost...&cat=500&page=1

messiah: yeah autosol works fairly well at polishing, in conjunction with a fast polishing buffer can work wonders. With painting, mine was never painted but once its all smooth I assume after that its fairly easy to paint using any painting method (using the appropriate heat resistant paints)

sky-chicks car is a great example... probably heaps more shiney than mine.

If it doesn't come up great, you may be better off just taking the parts of completely and taking them to a specific metal polisher (see: yellowpages).. they will probably give you a much better result than doing it manually, and saves time. Will cost you a bit of money, but generally its not much as using the proper machinery it can be done in minutes. Then you just have to worry about bolting it all back together.

Once you've finished with the polishing, you can apply a clear coat, but over time the clear coat will start to turn yellowish and dull......

it's easier to leave it raw and autosol it before showing it off. :)

Or get Lanosil from Supercheap. Comes in a pressure can and keeps the shiny stuff looking good. Needs a clean now and again tho. I did the engine bay in the soarer and it looks showroom after a few days driving. Sprayed everything. Got a couple more cans now to do the other cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...