Jump to content
SAU Community

Recommended Posts

when you compare it to a skyline, its not gonna come off as well obviously

but comparing it to another wagon its very good,

look at ford wagons, basic interior, leaf springs

commodore's are the same

only thing that will come close is a subaru legacy gt wagon but they are a bix exxy and the twin turbo's don't work very well

like you said bubba, some day i will also own another car to throw about and go fast in, but for now, the stagea is doing a pretty good job

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

if you wanted to do burnouts, you should have bought a commodore :D

I have a 3L'd R32 GTSt for that.. why would I buy a commodore?? Stag in to RWD keeps me happy until the 32's engine is back together.

Anyway, I much prefer the sound of a hipo RB torching the tyres over the sound of a ecotec v6 or chev v8.

Oi bubba do you know if the factory rwd procedure you discribed is the same for s1?

No idea mate, don't see why not.. it works on 33 and 34 gtr's AFAIK.. give it a bash :P

Edited by bubba
Yeah pulling your shaft in public will usually get you arrested :P

HAHAHA, that was a great comeback.

also i think the r32 gtr driveline is different to the r33/34 one.

33 and 34 are both controlled similar, while with the r32 its just a unplug of the fuse which fully unloads everything in the atessa system, or so i have read on here somewhere.

not 100% sure, but read somewhere. hence why you can buy those little torque controllers on ebay so cheap for the r32's and stagea s1's. apparently the s1 had parts from 32 and 33 in it.

but dont quote me on it.

i remember reading it somewhere a while back when i first got my car.

oh and on my s2 stag the plug is green with one yellow striped wire coming out of it, right at the top of the kickpad, it even hangs out a bit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...