Jump to content
SAU Community

Recommended Posts

cylinders 1,3,5 arnt fireing its def a fuel problem cause the spark plugs in cylinders 2,5,6 when u pull them out after having the car runing plugs are wet with fuel and smell like fuel changed my ecu with another rb20 one did the same thing suspect its a wiring probem but have checked the wires seems to be fine :D

check the suspect injectors for continuity.

checked the circut in the injectors that arnt workin to the computure circuts fine changed the the computure over with another rb20det comptuture made no difference changed the cas over with another made no differance :)

Check the injector pins on the ECU with a test light see if the problem is in the loom or at the ecu end, as you tried a different ecu almost certainly the loom somewhere, just keep tracing it until you find the issue, pain in the ass but not much else you can do.

This happened to me a few years ago on my pulsar gtir after I installed a fmic. I accidentally disconnected something but cant remember what its called. it might be a resistor pack or something for the injectors..

Anyway its the silver box thing on the passenger side, under the bonnet just near the top of the suspension turret. its got a plug on it with a few wires coming out of it.

It may not be a resistor pack. But my sr20det definitely had this plug thing that controlled the injectors. The silver part was just a shield that covered the plugs and I think there was 2 of them. I accidentally put tension on the wires with one of the stainless pipes I installed for the fmic which was enough to break the contact on the plug.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...