Jump to content
SAU Community

Recommended Posts

hey guys got a really bad shudder in my rs4 drive line shudders under any sort of load any one point me in the direction of any good drive line mechanics to sus this out for me also need cv boots replacing

cheers

Rose

Link to comment
https://www.sau.com.au/forums/topic/341244-driveline-shudder/
Share on other sites

Any kind of mechanic would be good to suss out the problem really.

Possibly a loose bolt, twisted tailshaft, i guess once they are under there, they will know.

Adelaide CV Joint and Mechanical Repairs in Para Hills?

RS4 with the front shaft still in?

Do you have different sized rims or tyres front to rear?

The AWD Stagea requires same diameter/circumference in wheels and tyres combo. If they're not the same, then your altessa system is complaining about it.

:)

  • 3 weeks later...
hey guys got a really bad shudder in my rs4 drive line shudders under any sort of load any one point me in the direction of any good drive line mechanics to sus this out for me also need cv boots replacing

cheers

Rose

I get same issue in my rs4 from time to time. under acceleration some times, bit of a shutter! havent had chance to have a look at it yet! Do have 17x8's on front and 17x9's on rear? no idea if that has anything to do with it! but dont see how having wider wheels would cause a shudder???????

shudder is 99% one of these ..... overheated/worn/bent /oily clutch, worn u-joints/ cv joints or too much lash in tranny or axle , or carrier bearings on drive shafts, (sometimes really worn bushes create shudder feel but rare unless tranny mount or engine mount is broken)easy to suss once the car is jacked up.

could be a combination of a few of the above items,

mine is getting bad, but clutch is worn out....lol annoying for sure

yeah i get that but how can it cause a shudder?

If you have different tyre sizes the transfer case has to slip to make up the difference.

In the R33 and later 4wds there is preload on the clutch inside the transfer case so it doesn't run free like the r32 4wds do. This is why you can not safely just pull a fuse and drive in 2wd with anything later than a R32.

The reason this causes shudder is because the clutches in the transfer case grip until the load between front and rear builds and then slips. This happens over and over very quickly causing a shudder. It can happen anytime, whether under load or not, it just depends at what point the clutch wants to grip/slip.

The shudder can also be caused by air in the system, get it bled out by your mechanic

My car has a shudder under mild load and is caused by air from a leaky bleeder and gasket, it is on the list of things to get fixed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
×
×
  • Create New...