Jump to content
SAU Community

Recommended Posts

Hey,

I am in need of a NSW Exemption letter for driving a prohibited vehicle whilist on your provisional license. I am offering $50 to anyone who can provide the following:

1) All the attached material that came with the exemption letter as well as the letter

2) The letter must have no restrictions, eg work time only driveable

3) MUST BE NSW

4) Must be scanned and be in good quality, large creases in the letter from folding will not be acceptable.

All i can say is the reasons i want the letter is for a prank, will be editing the information on the letter ( WILL NOT USE ANY OF YOUR INFORMATION ON THE LETTER that will be deleted in the editing process)

Once we have made a deal prior to payment you must email a scanned copy of the letter, but you may water mark it or draw lines across it using a computer program to render it usless. This is just protection for me so i know that you are a legit seller and have the letter. Once i have confirmed then I will send the money either over Paypal or Online Bank depositing and then you may send the letter and all the attachments.

This will be the quikest $50 you will ever make. 5 minutes of scanning and sending an email is too easy.

Link to comment
https://www.sau.com.au/forums/topic/341293-exemption-letter-nsw-only/
Share on other sites

if thats the case and your friend has never seen a exemption letter why don't u just make a random one in word with some government seal... i call bs. i may be wrong but regardless its illegal.

OMG THAT WOULD BE SUCH A BUUUUUUUUUUUUUURN

Nah not really.

He'd have to get permission from his father first and foremost, which I don't think would happen.

Technologically-Impaired-Duck-credit-card-age-verification-sounds-legit.jpg

alright the story is he has driven his fathers ferrari on his L's since its legal, but he is due to get his P's and he knows he cant drive it. He is new to P plate law etc and we want to give him the letter the day he gets his p's, his father doesnt mind that he drives it as well, luki bastard =P

2001 360 spider, very good condition for its age, and JoelyMoley its all in the detail. =D if your going to do a prank do it right

lolwtfbbqhax @ the two different posters :S

lolwtfbbqhax @ the two different posters :S

jawrgy is my bro's account and its constantly logged in, in mozilla and gr333dy is my account and its constatly logged in, in Internet explorer. Was flippin through the browsers and accidently posted on his account

jawrgy is my bro's account and its constantly logged in, in mozilla and gr333dy is my account and its constatly logged in, in Internet explorer. Was flippin through the browsers and accidently posted on his account

lol wow so who owns the 350gt that you both claim to own? :):P

we share =D bro love,

and the 350gt is being sold =( had a couple of buyers out last week to inspect. One had an MTA inspection. Any1 interesed PM me =D

Edited by Gr333dy

in before DAS KAMU.

also, i don't reckon anyone believes your increasingly complicated story.

please don't ask for fraudulent information on here, it just gives a bad light to a good forum.

in before DAS KAMU.

also, i don't reckon anyone believes your increasingly complicated story.

please don't ask for fraudulent information on here, it just gives a bad light to a good forum.

My gosh..... how is this fraudulant...

im not impersinating anyone, i stand to gain nothing

Complicated story??? I just want a template of the letter to slap my mates name on.... thats all

Calm down and stop thinking of the worst ><, lighten up have a lil fun

Maybe ill record his reaction to getting the letter then us telling him and post here for shits n giggles

Edited by Gr333dy
Hey,

I am in need of a NSW Exemption letter for driving a prohibited vehicle whilist on your provisional license. I am offering $50 to anyone who can provide the following:

1) All the attached material that came with the exemption letter as well as the letter

2) The letter must have no restrictions, eg work time only driveable

3) MUST BE NSW

4) Must be scanned and be in good quality, large creases in the letter from folding will not be acceptable.

All i can say is the reasons i want the letter is for a prank, will be editing the information on the letter ( WILL NOT USE ANY OF YOUR INFORMATION ON THE LETTER that will be deleted in the editing process)

Once we have made a deal prior to payment you must email a scanned copy of the letter, but you may water mark it or draw lines across it using a computer program to render it usless. This is just protection for me so i know that you are a legit seller and have the letter. Once i have confirmed then I will send the money either over Paypal or Online Bank depositing and then you may send the letter and all the attachments.

This will be the quikest $50 you will ever make. 5 minutes of scanning and sending an email is too easy.

Post crap like this on SAU again, and you are banned.

Closed.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...