Jump to content
SAU Community

Recommended Posts

I couldn't wait for the WRX sedans to come out, since the hatches were so damn ugly. I didn't think it possible, but the sedan is even uglier IMO.

I ended up buying the hatch and am loving it (09 model with the proper suspension, tyres and power)

I don't think the sedan is any more practical than the hatch, and in fact you lose a lot of flexibility with load carrying. The hatch suits our family duties perfectly, and has taken a few big loads with the back seats folded down. Couldn't have done that with the sedan.

Also, the sedan is 150mm longer, so harder to fit in my garage with the 6m long car trailer in front of it.

Looks? All I can say is they look heaps better in the flesh than on paper, but then again I've spent my whole life driving boring, ugly cars, so I don't have a need for cars that attract attention.

Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516121
Share on other sites

Hey guys,

as a family type sports car who likes the new sedan version of the STI? Wasnt a fan of the hatchback but i think this model could definitely grow on me!

http://www.redbook.com.au/used-cars/detail...id=12BE8212D553

I am in the same boat as you, Dames. Personally, I love my V35 coupe but will be needing more practical car in 3-4 years time for expanding family, plus abit of turbo power for driving pleasure. :)

For that, I would choose a 2010 STI hatch. They are very spaceable (Groceries shopping, airport transfer, baby pram, etc.), not 100% track purpose like Evo's (Good for city driving and long distance drives), and..oh my god..they are so damn sexy in a flash with those pump out guards. All you need to make it outstanding is a drop, carbon fibre goodies and exhaust. Sure it looks like a done-up Hyundai or Kia, but everybody knows it's a STI now.

The sedan and Evo 10 looks nice too, but not as practical as hatch for my likings. I would only go for a STi sedan or Evo if I have another daily (Hatchback or 4WD) and have extra cash to spend on track works.

Edited by Victor.T
Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516553
Share on other sites

sedan looks good in this pic, as does the hatch, but once you look at it from other angles then the hatch starts to look better

Subaru-Impreza-WRX-STI-4-lg.jpg

^ +1 for that.

Also, I think, performance wise, hatch is better at cornering and handling as Subaru rally drivers used and prefered the hatch.

Edited by Victor.T
Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516592
Share on other sites

I am in the same boat as you, Dames. Personally, I love my V35 coupe but will be needing more practical car in 3-4 years time for expanding family, plus abit of turbo power for driving pleasure. :P

For that, I would choose a 2010 STI hatch. They are very spaceable (Groceries shopping, airport transfer, baby pram, etc.), not 100% track purpose like Evo's (Good for city driving and long distance drives), and..oh my god..they are so damn sexy in a flash with those pump out guards. All you need to make it outstanding is a drop, carbon fibre goodies and exhaust. Sure it looks like a done-up Hyundai or Kia, but everybody knows it's a STI now.

The sedan and Evo 10 looks nice too, but not as practical as hatch for my likings. I would only go for a STi sedan or Evo if I have another daily (Hatchback or 4WD) and have extra cash to spend on track works.

Same boat indeed mate,

would love to stick to imports so hopefully there is some other hot Nissan available within the next few years or i might even jump ship and go Toyota...those Mark 2 IRV's are looking bloody fantastic

in my opinion and will surely only get better! Very VIP-ish :down:

post-35595-1288079328_thumb.jpg

post-35595-1288079336_thumb.jpg

Edited by TUFF_350
Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516889
Share on other sites

I am in the same boat as you, Dames. Personally, I love my V35 coupe but will be needing more practical car in 3-4 years time for expanding family, plus abit of turbo power for driving pleasure. :down:

For that, I would choose a 2010 STI hatch. They are very spaceable (Groceries shopping, airport transfer, baby pram, etc.), not 100% track purpose like Evo's (Good for city driving and long distance drives), and..oh my god..they are so damn sexy in a flash with those pump out guards. All you need to make it outstanding is a drop, carbon fibre goodies and exhaust. Sure it looks like a done-up Hyundai or Kia, but everybody knows it's a STI now.

The sedan and Evo 10 looks nice too, but not as practical as hatch for my likings. I would only go for a STi sedan or Evo if I have another daily (Hatchback or 4WD) and have extra cash to spend on track works.

If you are pramming it, get a wagon. There is no way the hatch will be big enough. Most sedans only just cut it.

Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516920
Share on other sites

Until now there has not been a choice with the rally cars, you either rallied a hatch or an Evo, for me the Sedan wins because it is a little less ugly, and because with the boy racer trolley handle it still looks a little like a WRX of old. Still next to the Liberty/Exiga these things are practically supermodels (a bit like comparing the current prime minister to the old one though)

Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516965
Share on other sites

the sedan sti

only looks good in white color, with black wheels,

the other colors makes the back look too much like a daewood(lights, and that chrome bootlid thing between the lights)

i prefer the hatch out of the 2

... still GC8 best looking rex

Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516974
Share on other sites

Same boat indeed mate,

would love to stick to imports so hopefully there is some other hot Nissan available within the next few years or i might even jump ship and go Toyota...those Mark 2 IRV's are looking bloody fantastic

in my opinion and will surely only get better! Very VIP-ish :P

Damn...that's the nicest Mark 2 I've ever seen.

You know you can make it VIP-ish with V36 sedan too. (Trying to keep you in a Nissan team. :down:)

Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516985
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...