Jump to content
SAU Community

Recommended Posts

Morning Gentlemen,

Just curious to see what people have in terms of options for changing the Diff ratio, particularly for a 32 gt-r.

Looking to go 4.3 but its a massive pain in the proverbial finding the diffs in the first place and then getting them in good condition..

What have people done ?

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/
Share on other sites

I'm guessing they are gts-4 diffs ?

I've put them in mine. Took the crown wheel and pinion out of the gts-4 diffs and put them inside my GTR diffs after having them cryo treated for extra strength. Difference is definitely noticeable in 3rd and 4th.

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/#findComment-5524963
Share on other sites

yeah going rate these days about $1000 for a set. still good value if you ask me. the biggest head f**k is you have to remove the engine to replace front diff so if you're not doing it yourself the labour bill for a simple ratio change quickly becomes a grand or two making it not exactly cheap.

so if you're bothering to put the 4.4 GTS4 gears in your GTR may as well grab a front LSD while you're at it and do the rear nismo LSD clutch pack upgrade too.

so:

$1000 for front and rear GTS4 ratios

$1000-$1600 for front LSD (depending on new or used and what brand)

$300-$350 for set of nismo clutch packs for rear LSD

engine removal and replacement (dunno maybe $1000-$1500)

remove sump and get new lsd and gears fitted and set (maybe $200)

remove rear LSD, fit clutch pack upgrade and CW and pinion (again maybe $200)

makes it an expensive upgrade all round but very nice once it's all done. it will handle like a different car and drive out of corners much improved.

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/#findComment-5525797
Share on other sites

yeah going rate these days about $1000 for a set. still good value if you ask me. the biggest head f**k is you have to remove the engine to replace front diff so if you're not doing it yourself the labour bill for a simple ratio change quickly becomes a grand or two making it not exactly cheap.

so if you're bothering to put the 4.4 GTS4 gears in your GTR may as well grab a front LSD while you're at it and do the rear nismo LSD clutch pack upgrade too.

so:

$1000 for front and rear GTS4 ratios

$1000-$1600 for front LSD (depending on new or used and what brand)

$300-$350 for set of nismo clutch packs for rear LSD

engine removal and replacement (dunno maybe $1000-$1500)

remove sump and get new lsd and gears fitted and set (maybe $200)

remove rear LSD, fit clutch pack upgrade and CW and pinion (again maybe $200)

makes it an expensive upgrade all round but very nice once it's all done. it will handle like a different car and drive out of corners much improved.

i belive you dont need to remove the engine, well thats straight from terry at award diffs,

he told me ha can do it in the car takes a little longer he said but no problems.

i was going to do it when he was doing my diff swap to the new sump but as i hadnt sourced gears yet he said he can do it later when its in the car.

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/#findComment-5525809
Share on other sites

yeah I have heard one of two people say they can do it with engine in car but it would be a massive c u next tuesday of a job. getting all the sump bolts out with engine and box still in the car is going to be tough. would still be a fair few hours labour to remove + replace sump even if they can do it with engine in car, and at $800-$100 an hour the labour bills add up quick!

still it's a good mod. worth doing.

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/#findComment-5525854
Share on other sites

You don't need to remove the sump to do it in the car.

yeah makes sense. I guess once driveshaft is out and diff cover off you can get enough room to get it out. in that case... rock on.

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/#findComment-5526339
Share on other sites

yeah going rate these days about $1000 for a set. still good value if you ask me. the biggest head f**k is you have to remove the engine to replace front diff so if you're not doing it yourself the labour bill for a simple ratio change quickly becomes a grand or two making it not exactly cheap.

so if you're bothering to put the 4.4 GTS4 gears in your GTR may as well grab a front LSD while you're at it and do the rear nismo LSD clutch pack upgrade too.

so:

$1000 for front and rear GTS4 ratios

$1000-$1600 for front LSD (depending on new or used and what brand)

$300-$350 for set of nismo clutch packs for rear LSD

engine removal and replacement (dunno maybe $1000-$1500)

remove sump and get new lsd and gears fitted and set (maybe $200)

remove rear LSD, fit clutch pack upgrade and CW and pinion (again maybe $200)

makes it an expensive upgrade all round but very nice once it's all done. it will handle like a different car and drive out of corners much improved.

Definitely looking at the 4.4 the car is mostly street driven and will be doing some test and tunes until I feel it is ready for trackdays.

I feel having a huge top speed...260km/h plus Isn't necessary as I won't be pulling that sort of trap speed at Willowbank or QR.

Would definitely like to redo the rear LSD but is the front necessary, particularly on a street car ?

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/#findComment-5526392
Share on other sites

front lsd not necessary on a street car. but a good idea for a track car. especially if you are changing ratios, may as well do it together. have a look at any serious track GTR... front lsd.

it's not like you'll fail without one, but on the track a front LSD transforms the car. just like a rear LSD does for a GTST etc. needs a fair adjustment in driving style though.

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/#findComment-5526412
Share on other sites

Why does the sump need to come off for??

There is 3 bolts retaining the NS drive shaft axle, 9 bolts from memory holding the bearing retainer plate in the OS of the diff housing and the flange nut on the pinion shaft.

The center falls out the front, the pinion and shaft also get knocked out the front. A small slide hammer can pop the old bearing cones out easily and a tappered nylon drift can knock the new ones back in.

Bearing preload and backlash is easy to set up with shims.

We used to service the quaife center in my old race car every 6 meetings and inspect the crown wheel/ pinion gears afte every race meet. Never had any problems getting the diff center in and out.

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/#findComment-5526594
Share on other sites

If there was no backlash adjustment or bearings replaced it took an hour with 2 of us doing it.

If it needed a new crown wheel, pinion or bearings it could take up to 4 hours max depending on how the assembly went.

Typically we were smashing crown wheel and pinion teeth off the start line so we were doing it all the time, never fixed one at the track though, just drove it RWD in most trophy races after it broke in the heats.

That's a car which was constantly apart and we knew it inside out

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/#findComment-5526824
Share on other sites

it took me 5-6 hour's to do my first 1, which was drive in hoist, CV's out, prop shaft out, pop the diff cover pull the centre,

pop the pinoin, then new bearing's 3 or 4 goes to get the pinoin height right same with back lash..

Take's about half hour less each time, far from a hard job just gotta take your time and you'll knock it out no drama..

Cheers

Link to comment
https://www.sau.com.au/forums/topic/342377-diff-ratios/#findComment-5526869
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...