Jump to content
SAU Community

Recommended Posts

I am selling my ride and I am deciding to remove most of the parts. I think its easier to sell of a stock car rather than selling it the whole package.

RB25DET w/Bored and Coated Block

RB26DETT Crankshaft

87mm WISECO Pistons

CROWER Conrods

ARP Headstuds

COSWORTH Main and Rod Bearings

COMETIC 1.5mm MLS

(I will include a RB26DETT bare block which I purchased just for its crankshaft)

RB25DET Ported and Polished Cyl. Head

TOMEI PROcams 260 Degree w/10.25mm Lift (Intake)

TOMEI PROcams 260 Degree w/10.25mm Lift (Exhaust)

TOMEI Type B Valve Springs

TOMEI Forged Solid Lifters Conversion

TOMEI Shims

TOMEI Cam Pulleys (In&Ex)

*(I will also include a bare RB26DETT cyl. head, stock pulleys, cam covers, stock valves, springs, retainers and lifters)

RB26DETT Individual Throttles & Plenum

GARRETT GT35R .86 Turbo w/Ported Shroud and Polished Housing (3 months old) (I had to purchase a new turbo to rebuild my turbo. My previous turbo had bearings issue)

TIAL 44mm Wastegate

GREDDY Timing Belt

JUN Oil Pump

HKS Downpipe

SARD 800cc Fuel Injectors

NISMO Fuel Regulator

SARD Thermostat

SARD DENSO Iridium Spark Plugs

Q45 AFM

Greddy Type R Blow Off w/Uprated Springs

WALBRO Fuel Pump

HKS Oil Cooler

HKS Intercooler

BLITZ SUS Power Air Filter

OGURA RACING Twin Plate Clutch

All items are purchased new. If somebody would take the whole lot I would let go everything for $8,000.00 with Power FC and controller. This motor made 444whp at 1.5bar on a DD Dyno. Motor can still be push way more but I would prefer a stable and a healthy motor. Revs at a healthy 9000rpm. Engine is guaranteed healthy!

Link to comment
https://www.sau.com.au/forums/topic/343171-fully-built-500hp-motor/
Share on other sites

Very keen on the head. Can you give a price on it with shipping to Sydney?

NYTSKY,

I hope to sell it in a whole package. I have posted my engine for sale but I pulled back because I dont want to separate.

It will be very hard for me to source parts to put back a stock engine and a car to sell.

NYTSKY, I hope to sell it in a whole package. I have posted my engine for sale but I pulled back because I dont want to separate. It will be very hard for me to source parts to put back a stock engine and a car to sell.

Hey mate, are you still selling the package?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...