Jump to content
SAU Community

Recommended Posts

gordon home come you havent got your car back yet? should have only taken 1 day to do the work?  When i got my 100k service done i picked it up the next day

erm.. probably.. they needed to redo the radiator.

I'm picking it up in 20-30 mins actually.

  • Replies 62.7k
  • Created
  • Last Reply

Top Posters In This Topic

  • chaos

    7164

  • Ska

    5791

  • BelGarion

    3645

  • Nexus9

    3590

Top Posters In This Topic

just spoken to squizz

quick cruise just been organised

time: Now

meet: griffith uni mt gravatt

destination: BP servo then thro ipswitch

costs: fuel and dance class

due to the lack of public organised cruises we have taken it upon ourselves to organise this cruise

CB's essential

round trip 160 KMs

:D

my car went on the dyno .. big flat spot at 4000rpm.. mine really suffers from the stock ECU gavin was saying.. only real solution would be a powerFC.

What sort of snoop james? want me to ask about it, or have a look and see what has been done (if possible)

take it down to enzed

and u will need to get them to tap some brass fittings and a hose tail to go on the pump outlet.

8mm fuel injection hose

i didnt use nylon tape on my theads cause fuel just eats it away anyway, the threads they tapped for me used tapered threads so they sealed themselves up anyway

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...