Jump to content
SAU Community

Reliable Service For R33 Gts-t In Brunswick/coburg/carlton - Inner North


Recommended Posts

these are some close by workshop's

dr drift/ 5/9 alick rd brooklyn 0425818755

chasers motorworks/ 4/440 dynon rd footscray 96877118

eas performance/ 11 victroy rd airport west 93302001

allsparks performance 2 beckett av east keilor 93316110

hope it helps...... :(

thanks for all those replies...

sounds like the footscray one is the closest to me (since i'm in brunswick):

chasers motorworks/ 4/440 dynon rd footscray 96877118

although i thought there would be something closer.

cheers,

vekra

thanks for all those replies...

sounds like the footscray one is the closest to me (since i'm in brunswick):

chasers motorworks/ 4/440 dynon rd footscray 96877118

although i thought there would be something closer.

cheers,

vekra

I'd goto Chasers.

I know Jack who use to work for Chasers, is at JAK Motorsport.

But which ever suites you :unsure:

other than engine oil anf oil filter.. what else do i need to replace after buying a second hand car? transmission oil,coolant,o2 sensor?

how much does it cost for a service?? tnx

i would change the fule filter, air filter, spark plugs, brake fluid, diff oil, power steering, a/c, check the coil packs new battery

about $400-$500 using good oils.

thats the engine check the break pads, tires and suspension also.

thanks for all those replies...

sounds like the footscray one is the closest to me (since i'm in brunswick):

chasers motorworks/ 4/440 dynon rd footscray 96877118

although i thought there would be something closer.

cheers,

vekra

there are heaps of workshops around coburg, brunswick but i dont know where they are.

you asked for a good reliable shop, iv been to all four of them for different things and they are good.

i cant recommend any in your area cos i have not used them.

i would change the fule filter, air filter, spark plugs, brake fluid, diff oil, power steering, a/c, check the coil packs new battery

about $400-$500 using good oils.

thats the engine check the break pads, tires and suspension also.

fuel filter = brand & cost

air filter =

brake fluid =

diff oil =

power steering =

a/c?? =

another thing..since skyline is not that cheap car can you provide a good quality brands i need to buy for the different oils.. ive got a motul for engine oil..ryco i think for oil filter.. new spark plugs ngk laser platinum something..

just new here and just wanna know this different kind of stuff that im gonna put to my car rather than pay the store do the service and put their own oils..

tnx for the input..

fuel filter = brand & cost

air filter =

brake fluid =

diff oil =

power steering =

a/c?? =

another thing..since skyline is not that cheap car can you provide a good quality brands i need to buy for the different oils.. ive got a motul for engine oil..ryco i think for oil filter.. new spark plugs ngk laser platinum something..

just new here and just wanna know this different kind of stuff that im gonna put to my car rather than pay the store do the service and put their own oils..

tnx for the input..

engine oil motul 300v 5 liters $125

gearbox oil motul gear300 3.6 liters $118

diff oil castrol saf-xa 1.5 liters 49$

break fluid gs610 $36

air/flue filter about 25-30$ each from repco

power steering ?

coolant ?

a/c ?

just get cheap spark plugs (bkr7e) $30

thanks for all those replies...

sounds like the footscray one is the closest to me (since i'm in brunswick):

chasers motorworks/ 4/440 dynon rd footscray 96877118

although i thought there would be something closer.

cheers,

vekra

theres other good places on teh list..

jus sayin.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...