Jump to content
SAU Community

Recommended Posts

Ok its time to part out my drift project that almost made it but has to makr room for a house. I am open to REASONABLE offers on all things.

- Pintara gxe shell with REG till March 2011, series 3 fromt end, series 3 tail lights, sound deading removed, BRAND NEW battery mounted in boot and wired up, slight damage to left hand sill

price $200

149423_458959350877_536325877_5698260_3291826_n.jpg

73001_458962475877_536325877_5698277_485159_n.jpg

- 4x114.3, 25mm x 2 bolt on spacers

Price $125

- Monza Evo fixed back race seat on r31 rail

$110

148693_458975370877_536325877_5698351_566004_n.jpg

- Brand new HSD HR s13 coil overs, modded to fit straight in to diff (still have to drill rear shock tower) 10kg front and 8gk rear spring rate

Price $1400 (cost me $1600 a couple of months ago)

n536325877_1938727_7361233.jpg

- S13 front controll arms with uprights and brakes (pads and disks)

Price $180

- barnd new Microtech Lt10s with x4 ignition box and 4 x coils

Price 1200 (microtech cost me $1300 and coils cost me $200)

148338_458975710877_536325877_5698360_6592498_n.jpg

- Ca18de package , has turbo manifold (T3 flange), oil return pipe in sump, Ca18det injectors, BRAND NEW exedy clutch, Recoed Altinator, ca18DET gear box, cutom gear box mount, urethane engine mount, Brand New NGK Iridium plugs,

Price $850 (Clutch cost me $750, alt cost $120 to reco, urethane mounts cost $80, you do the math)

4519_85395005877_536325877_1938737_5702046_n.jpg

75777_458964700877_536325877_5698291_297899_n.jpg

- S13 turbo box with Ca18det bell housing

Price $180

- 11 x stock steel rims with 185/75 r14 tyres,8 are road worthy.

Price $100 (thats less than $10 a wheel and tyre)

- 2 x 235/45 r17 bridgestone potenza tyres a little camber ware but above indicators

price $65

77026_458964095877_536325877_5698283_5155830_n.jpg

- 2 x 235/45 r17 mixed tyres just above indicators

price $35

- 2 x Rays tag rurher rims 17" x 9" with 80% tyres

price $350

72742_458974765877_536325877_5698343_1414994_n.jpg

- 4 x enki rims 17"x8" and 17"x7" with 235 and 215 tyres about 60% tread left

Price $750

76383_458976670877_536325877_5698388_3861180_n.jpg

-New bosch 044 external pump (has only been installed)

Price $150

4519_85395065877_536325877_1938748_7617424_n.jpg

-New in tank VL lift pump (has only been installed)

Price $100

- 1lt stainless steel surge tank

Price $180

- s13 ca18 brake master

Price $50

- s13 ca18 brake booster

Price $30

- s13 ca18 power steering pump

Price $30

- Random front strut brace

Price $30

73728_458977520877_536325877_5698403_1207940_n.jpg

- S14 standard exhaust dump pipe back

Price $30

74413_458964465877_536325877_5698288_3614993_n.jpg

- s14 standard side mount intercooler

Price $40

73733_458964490877_536325877_5698289_434581_n.jpg

- 2x 17x8 rims, rubber is only good for skids, 5 x 120.4 commmodore/bmw stud pattern

74166_458963995877_536325877_5698282_5954509_n.jpg

Link to comment
https://www.sau.com.au/forums/topic/343963-parting-out-my-drift-car-melbourne/
Share on other sites

hey nath I am in Ferntree Gully, melbourne. coil pack and loom is for sale with the microtech and the inlet manifold is for sale with the engine. the cooler and turbo setup is not for sale as I am keeping it.

There is a pic up of the intercooler, that's all...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...