Jump to content
SAU Community

Recommended Posts

I have the following R32 GTS-T specific parts

Fully adjustable suspension. Height, dampener and cones with 3 pairs of springs 4,6 & 8 Kg’s 500km old $500

Nismo rear strut brace $100

Front strut brace with brake master cylinder stopper $100

Nismo original plastic rear pods $ 100

Rear wing like a GTR $120

Steering rack with tie rods $70

Drive shaft $40

Head lights and blinkers L&R $150

Brake master cylinder $90

5 Stud Hubs $90 each side

Lower control arms $25 each

Bottom door trims $20 pair

Radiator 25mm $50

RB20 turbo $30

Conversion spacer studs to allow GTR rotors and calipers to fit GTS-T $50

Clutch Fan fits all RB’s$40

Any questions please post up or PM. Ta

For anyone looking to do a manual conversion to their GTS-T!

Gear box $100

Clutch master and slave & piping $100

The following parts are R32 GTR which are an upgrade that fit an R32 GTS-T

3 “ full exhaust with GTS-T turbo header pipe $140

2way Mechanical Diff 4.2, hub to hub with cradle $600

Full oil cooler kit, 300mm x 250mm x 50mm cooler, with sandwich plate and remote filter and oil temp gauge and all hoses $400

FMIC 75mm thick, 600mm x 300mm with piping to engine bay R32 GTS-T will need inlet pipe $140

Adjustable front Caster Rods $ 90

Adjustable front camber arms $120

Rear Calipers $ 70

Rear rotors $50

Front calipers with various meaty pads $120

NEW unused Ferodro DS2500 pads $180 (New $260)

DBA veined rotors 500km old just machined $200

Fuel tank $180

Fuel pump $140

Front seat with small tear’s $ 90

Black aluminum bonnet that needs a small repair $80

Radiator 20mm $90

Pickup from Castle Hill, Sydney prefered, please check Oz post for postage info at your cost.

I will post up separately but have the following also.

3lt engine rebuilt with forged CP pistons and rings, with a serviced GTR head, GTR inlet manifold and single turbo manifold for T04Z, not used and on engine stand.

R34 GTR original wheels currently being re-sprayed.

Set of 4 x white 17 x 8” and 17 x 9” 35mm offset jap racing wheels with worn Dunlop D02 on them.

Pair of 18 x 11” with 295 semi’s and a spare set of Porsche cup 270 slicks.

Pair 18 x 9.5” with Porsche cup slicks.

post-42-1289728318_thumb.jpg

post-42-1289728327_thumb.jpg

post-42-1289728337_thumb.jpg

post-42-1289728347_thumb.jpg

post-42-1289728356_thumb.jpg

post-42-1289728365_thumb.jpg

post-42-1289728377_thumb.jpg

post-42-1289728397_thumb.jpg

post-42-1289728411_thumb.jpg

post-42-1289728427_thumb.jpg

post-42-1289728441_thumb.jpg

post-42-1289728452_thumb.jpg

post-42-1289728462_thumb.jpg

post-42-1289728474_thumb.jpg

post-42-1289728482_thumb.jpg

post-42-1289728490_thumb.jpg

post-42-1289728498_thumb.jpg

post-42-1289728514_thumb.jpg

post-42-1289728522_thumb.jpg

post-42-1289728532_thumb.jpg

post-42-1289728559_thumb.jpg

post-42-1289728567_thumb.jpg

post-42-1289728579_thumb.jpg

post-42-1289728591_thumb.jpg

post-42-1289728601_thumb.jpg

post-42-1289728609_thumb.jpg

post-42-1289728618_thumb.jpg

post-42-1289728690_thumb.jpg

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

I'll take the rear pods. Can u post to melb 3021 if so how much thanks

The pods weigh nothing and will most probably fit in a STD postage bag, $10-$15 should cover it.

whats brand of the 2way? how old is it?

I have used it for about 500km, no idea on its age prior, I paid heaps for it from in importer about 2 years ago.

Hey mate keen for seat would u post? To Adelaide 5010

Sorry Hcr, it weighs way too much and postage will cost heaps and I have no way of packing it. If you have a contact in Sydney who can pick it up and do the postage your in luck otherwise sorry no go. :)

Paul I'll take the rear calipers, rear rotors and the damaged bonnet.

I can pick up any night during the week that suits you

thanks brad

Brad,

Done , no probs. Im about any day but wednesday this week. Tomorrow night will be good for me, any time after 6pm. I will PM you my address now, just let me know what is good for you.

Can you pm me your bank details and mobile number and I'll send you the money to your account

How old are these?:

Adjustable front camber arms $120

gwin,

About 2-3 years and 500km of usage, and you get the limited additon brake deflectors as well! These are one of a kind! :)

Can you pm me your bank details and mobile number and I'll send you the money to your account

Done and details on the way, also your address as well.

Thanks

What bank are u with. Also how much to post the coilovers, any leaks or knocks

The coil overs are perfect, 500km old and my only problem they were a little firm, hence the 4kg spare spring's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...