Jump to content
SAU Community

Recommended Posts

HI this is the first Post I have ever done on a forum so i hope i done f*k it up to much :)

Ok i have a few things that i wanna sell all top quality parts no "style" parts or cheap knock offs.

R33 Gtst GearBox Mint condition $1500

RB25DET HKS 3037s Turbo kit will separate Turbo $2700 Manifold $1500 Waste gate $1000 the lot $5000 All still unused

Trust cooler Used $600

RB25DET short block cp forged pistons, eagle rods, arp main stud kit, jun coller, king bearings $3000 i have other bit aswell like n1 oil pump from before i pulled down the motor i also have the head and other parts aswell for the motor head has been ported 3 angle valve job new stem seals and i have a 1.2 mm cometic head gasket $800 for head and gasket.

The skyline is a rolling shell when i bought it, it could have been registered but i never did because it was only going to be a race car (i have some papers that came with the car)shell has a bomex kit but no front bar it got ripped off when the towie unloaded it has 2 way diff and ha tein coil overs no seats and trims have been removed ac been removed no motor no box still have trims $3500 does no come with buddyclub wheels the buddyclubs that were on it were 19X10 with 285 on rear they fitted nice roof is faded a bit and some cracks in front glass guards.

I will edit this because i left heaps of stuff out but send me any questions you have and i can send you pics or pm you back.

Cheers Gus.

post-53617-1289742196_thumb.jpg

post-53617-1289742379_thumb.jpg

post-53617-1289742528_thumb.jpg

post-53617-1289742588_thumb.jpg

post-53617-1289742614_thumb.jpg

post-53617-1289744036_thumb.jpg

post-53617-1289744460_thumb.jpg

hi, i was just wondering how much you could do the head for and if it is an rb25det head, i really need a new head mine had a 6 inch crack along the water chanels

please text me on 0417670410

Joel

Yeah i can do that for the cooler just zoom in on it and check the little dint it has in the core i will take a closer pic for u but just check it first.

  • 4 weeks later...

i also have an rb26 gearbox for sale $650 and some engine stands 3 legs are $40 and 4 leg is $50 there will be more as i go through my shed!!!!

post-53617-0-25236600-1292459877_thumb.jpg

post-53617-0-81807400-1292459989_thumb.jpg

post-53617-0-12684200-1292460121_thumb.jpg

post-53617-0-03328300-1292460270_thumb.jpg

post-53617-0-53490200-1292460358_thumb.jpg

post-53617-0-05635100-1292460648_thumb.jpg

  • 4 weeks later...
  • 1 month later...
  • 3 weeks later...

1/4" -4 Sleeve (Per Foot) $9.00

3/8" -6 Sleeve (Per Foot) $11.00

1/2" -8 Sleeve (Per Foot) $12.00

5/8" -10 Sleeve (Per Foot) $14.00

3/4" -12 Sleeve (Per Foot) $16.00

1" -16 Sleeve (Per Foot) $19.00

1 1/4" -20 Sleeve (Per Foot) $23.00

I have 100 Foot of each size. Also i have the special heat proof sealing tape $5 a foot see pics.

post-53617-0-74861800-1300254115_thumb.jpg

post-53617-0-35695300-1300254186_thumb.jpg

post-53617-0-37077500-1300254268_thumb.jpg

post-53617-0-24002900-1300254626_thumb.jpg

post-53617-0-73651200-1300254758_thumb.jpg

  • 2 months later...

Rear strut brace $60

Coilovers $800

Front strut brace $60

Pair of Weds wheels $150

Single Wed wheel $50

space saver $50

Stern wheels $300 just been powder coated

Rear tail lights $80

Rear Garnish $20

Dash $50

Bonnet $100

Right door $150

Left door $150

Cluster $100

post-53617-0-28153100-1307527937_thumb.jpg

post-53617-0-12355500-1307527946_thumb.jpg

post-53617-0-93791900-1307527954_thumb.jpg

post-53617-0-84803200-1307527963_thumb.jpg

post-53617-0-82773700-1307527971_thumb.jpg

post-53617-0-15874500-1307527980_thumb.jpg

post-53617-0-32247000-1307527988_thumb.jpg

post-53617-0-64419700-1307527995_thumb.jpg

post-53617-0-73830300-1307528004_thumb.jpg

post-53617-0-60447200-1307528011_thumb.jpg

post-53617-0-41382200-1307528062_thumb.jpg

post-53617-0-88857900-1307528071_thumb.jpg

post-53617-0-09577500-1307528089_thumb.jpg

post-53617-0-24417000-1307528096_thumb.jpg

post-53617-0-22517500-1307528105_thumb.jpg

post-53617-0-36638200-1307528112_thumb.jpg

post-53617-0-77952300-1307528119_thumb.jpg

post-53617-0-32419200-1307528125_thumb.jpg

post-53617-0-12934000-1307528131_thumb.jpg

post-53617-0-84691300-1307528136_thumb.jpg

post-53617-0-32087700-1307528182_thumb.jpg

post-53617-0-10065500-1307528189_thumb.jpg

post-53617-0-98322700-1307528225_thumb.jpg

post-53617-0-50690400-1307528232_thumb.jpg

Yes Ipswich i would like to get rid of this by the weekend

Hey Justin, are you still selling the rolling shell?? Because i am interested in it. Also, where is the location of the shell?? Cheers :)

What just the bare shell because im in the middle of tearing it down to just a bare shell

If this is still avalible, How Much for the Shell,?

Not really interested in anything else but the shell, Since i am a Red P-plate and am very limted,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...