Jump to content
SAU Community

Recommended Posts

i have a thud noise happening when taking off from 1st, not launching or anything, just normal drive off

any suggestions where my search should being, i was thinking possible engine or transmission mount

car has recently been fitted with new clutch and im assuming the workshop would have mentioned if the transmission mount was stuffed

also how hard is it to change engine mounts without removing the engine itself

Link to comment
https://www.sau.com.au/forums/topic/344327-thud-noise-on-takeoff/
Share on other sites

i have a thud noise happening when taking off from 1st, not launching or anything, just normal drive off

any suggestions where my search should being, i was thinking possible engine or transmission mount

car has recently been fitted with new clutch and im assuming the workshop would have mentioned if the transmission mount was stuffed

also how hard is it to change engine mounts without removing the engine itself

My 32 GTR is also making a thud noise and when i looked under i noticed one of the rear cradle bushes was stuffed so i would check there first. I have not changed mine yet, but im 90% sure that's the problem with mine.

My 32 GTR is also making a thud noise and when i looked under i noticed one of the rear cradle bushes was stuffed so i would check there first. I have not changed mine yet, but im 90% sure that's the problem with mine.

tnx for the suggestion, I'm thinking of taking it down for pedders $14 28 point check to get a comprehensive inspection done

I reckon Engine mount. Does it also thud when you let off? (ie Let off gas before changing into 2nd)

Changing engine mounts is easy,

Jack up front, support car on stands

Jack up engine just enough to take the weight (Make sure you have a nice piece of timber to go between sump and jack)

Out with old in with new :laugh:

EDIT: this if for most cars, I just noticed you are godzilla powered, I have never changed a mount on a GTR so you may wanna find some specific info regarding that mate. (knowing how fun they are to work on lol)

Edited by Mandingo
I reckon Engine mount. Does it also thud when you let off? (ie Let off gas before changing into 2nd)

Changing engine mounts is easy,

Jack up front, support car on stands

Jack up engine just enough to take the weight (Make sure you have a nice piece of timber to go between sump and jack)

Out with old in with new :(

EDIT: this if for most cars, I just noticed you are godzilla powered, I have never changed a mount on a GTR so you may wanna find some specific info regarding that mate. (knowing how fun they are to work on lol)

worn engine mounts, will it be visible and obvious when looking at it under the car that its shagged?

anyone replaced them with engine in?

I've got clunks and thuds, and a nismo engine/gearbox mount kit to go in when i find some time. Dont know if it will fix it....

Check out this thread on replacing them;

http://www.skylinesaustralia.com/forums/Cv...20&start=20

I've got clunks and thuds, and a nismo engine/gearbox mount kit to go in when i find some time. Dont know if it will fix it....

Check out this thread on replacing them;

http://www.skylinesaustralia.com/forums/Cv...20&start=20

u beauty, was looking for this tnx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...