Jump to content
SAU Community

Recommended Posts

hi guys,

im flying up from syd this sat & landing @ brisbane airport 7am...i would like to know of any reputable workshops that can do a quick inspection on the car on a hoist? make sure there is no obvious accident damage & that the car is straight as a nail!

alternatively, im also happy to use a hoist & do the inspection myself, shouldn't take longer than 20min i'd say :D

regards

marko

0405 336 843

Link to comment
https://www.sau.com.au/forums/topic/344453-buying-an-r32-gtr-this-sat-20-nov/
Share on other sites

hi guys,

im flying up from syd this sat & landing @ brisbane airport 7am...i would like to know of any reputable workshops that can do a quick inspection on the car on a hoist? make sure there is no obvious accident damage & that the car is straight as a nail!

alternatively, im also happy to use a hoist & do the inspection myself, shouldn't take longer than 20min i'd say :)

regards

marko

0405 336 843

As craig said, let us know the area for one close, but otherwise,

Give dan a call at Erd in Stapylton

07 3807 2789

If he is too busy then give Mark at Godzilla Motorsport in Wakerly a call

07 3890 4488

Both garages are more than reputable :D

i guess nearest to brisbane airport would be best, this is where i am meeting the seller on the day

hopefully a workshop that is quite active on this forum as well, as chances are i might know them by their avatar name :D

As craig said, let us know the area for one close, but otherwise,

Give dan a call at Erd in Stapylton

07 3807 2789

If he is too busy then give Mark at Godzilla Motorsport in Wakerly a call

07 3890 4488

Both garages are more than reputable :D

i know of dan very well (elite racing) as well as mark @ godzilla ms

how close are they from bris airport?

Well Dan is a club sponsor, he is a bit further away tho :D

Godzilla is pretty close to the airport, just jump on the highway and go over the bridge, you will be there in about 20 mins

Mark is the closest out of those 2.. Maybe give him a call.. Google Maps says 18min drive.. will be on a Toll road though as you are going over the Gateway bridge

Google Directions

Not sure if the link will work.. they are your options.. maybe the guy has an e-toll as you cannot pay anymore.. it's all electronic

EDIT: Yeah link wont work lol.. his address is 1/20 Ingleston Rd, Wakerley

Edited by .:: GimpS-R34 ::.

Also Mercury motorsport are another one & are situated in 2/278 Newmarket Rd Wilston Qld . They are open saturday mornings from around 9am - 1pm . Give trent a call on 0733523363 or 0402421437 , he will only be to happy to help !

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...