Jump to content
SAU Community

Recommended Posts

Autech... expensive. I seem to recall less than 100 were made.

I do remember in an old HPI some guy took a 33 GTSt sedan and did a full GT-R conversion (yes I know, it takes all sorts).

Would you consider a 260RS Stagea wagon? Bit more realistic goal but admittedly I do not know the depths of your wallet...

T.

ppl who has them would tend to hold on to that due to its collector value. with the new compliance scheme in effect, and gt-r 4 door sedan will have to be complied as a separate model, I was told. One compliancer told me that due to the low volume and availability, he will only do it if the customer pays for all the process to gain full compliance approval (evidence pack) on the model, which is a lot more than $4000-6000 that most people pay for a compliance on an approved model already. I doubt it will involve destroying one good gt-r sedan for side impact crash as it is a variant of the 4-door model, but don't be surprise if you have to, then you'll need to buy two gt-r sedan. One to crush test (and reexport or destroyed afterwards), and the other to get the first compliance.

Cost wise? Nope. So best bet is to wait one of those believed to be 5 cars in Australia up for sale one day...

my pockets aren't deep enough for a stagea....I was just throwing aroung thoughts as 4 door aren't really looked at as cool here but I love em. Anyone who knows my old 4 door has to admit it was nice and I miss it but love my GTR so logically you can guess what I want. My GTR owes me a lot and does 12.3 but I'd swap anyday for a stock as a rock 4 door gtr

Guest darrinspencer

If you happen to find the White one that was featured in HPI, make sure you check it out throughly.

I am not one to normally bag other people's car, but I would not want you to buy something that is not so original.

I know the importer/panel beater that imported the car.

It was picked up really cheaperly at the time damaged.

The jap's did not want it.

It had hit a pole directly head on, and then the pole fell on the roof.

The car was repaired here with a new front and roof fitted approx 3 years ago.

The entire car was repainted.

I saw the car the day it came out of the shop. It looked pretty good.

The panel shop that did the work, does a really good job, so do not be totally put off by the previous damage, but least you know what to look for.

I know there is a couple.....anyone know of them. If so can I get contact details.

33

Make your own would be your best option i think.....Not a genuine GTR but a 4 door with GTR running gear, maybe start with a 4 door GTS4

Are you coming down for Drag Combat on Sat??

Ricknismo,

I have spent 12 months trying to find a 4 door GTR. There is only one real undamaged one (silver) that I know of and it was in Unique Auto's May '03 I think. It was sold for around $75k. There is the White rebuilt one and there is a black one I looked at last year . It is a GTs4 with vspec GTR running gear that was build by Skyline imports, it was sold for $40k october '03, the dealer was trying to tell me it was a real one (diddnt fool me, but I was very tempted) the car was sold to someone in dubbo. I have spoken to several importers and what RS73 said is correct as the car would need different compliance to a 4 door GTS or a 2D GTR as the evidence is not for a 4 door with a RB26.

I was told that the car would be about $65k + compliance, so drive away for $75k, but you would have an awsome car. I could not wait and go through the hassels, so I bought a XR6T instead.....I still want a 4 door gtr, but that will have to wait.

I can tell you where a Stagea RS260 is going for under $60k if you are interested....this is a 4 door wagon with the heart of a GTR vspec

Mal

give Derek a call from http://www.motorman.com.au/

The car should have compliance in a couple of weeks.

Pearl white, 40k/km 4.5/5 auction grade, its a beast. I would have got one, but I had to get a car that I could lease.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...