Jump to content
SAU Community

Recommended Posts

Hey just wondering cause i never bought custom plates before, could you buy a custom plate and reserve it without fitting it onto a car? Also the cost is it just $200 and you pick up your plates or is it a fee for the plates themselves plus the annual $200? cheers

All i know is replacement plates are $35, not 100% sure but the initial $200 should include the plates , yes they can be held onto without installing on car .

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558674
Share on other sites

$200 upfront cost includes plates.

Would you know if i could just go buy a custom plate and have it reserved until i decide to fit them onto a car? or would i need to exchange it for the current plates i got registered? reason asking cause im driving my parents spare car until i get my own but i kinda want to reserve a plate now so ill have it by the time i get my car before it gets taken or something.

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558816
Share on other sites

Pretty sure that you need to put your new plates on within a week or so as your plates are attached to your car registration. You will need to surrendder your old plates within a timeframe (2 weeks AFAIK). Also pretty sure that you can't reserve any plates.

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558903
Share on other sites

^^^ Correct, you cant buy new custom plates unless you can register the car their going on, so in that case you need a car rego for them to change over to the new ones, you cant just go in and buy plates, unless you register a car for them to go on.. and depends on the plate you want, my old IGTR32I ones were $280 a year, new ones are only $200 a year.. think you pay an extra $80 for an extra number/letter (7 all up instead of 6), but not sure on that..

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558930
Share on other sites

I had my custom plates reserved for 1 year before associating them to a car......Cost $200, mind you i was young and stupid back then and i had a large disposable income... these days with wife and kids im lucky to get $5..... :ermm:

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558934
Share on other sites

Pretty sure that you need to put your new plates on within a week or so as your plates are attached to your car registration. You will need to surrendder your old plates within a timeframe (2 weeks AFAIK). Also pretty sure that you can't reserve any plates.

You cant reserve them , payment must be made for yearly contract of $200 ,

payment of custom plates must overlap current registration if they go on a car - "pain in the ass"

At the end of the day they dont need to go on a car at all , you can put them on a wheelie bin , you own the contract

Edited by NISSAN GTR
Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558938
Share on other sites

^^^ Correct, you cant buy new custom plates unless you can register the car their going on, so in that case you need a car rego for them to change over to the new ones, you cant just go in and buy plates, unless you register a car for them to go on.. and depends on the plate you want, my old IGTR32I ones were $280 a year, new ones are only $200 a year.. think you pay an extra $80 for an extra number/letter (7 all up instead of 6), but not sure on that..

6 characters and below is $200, 7 characters is $255.

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5559111
Share on other sites

Pretty sure that you need to put your new plates on within a week or so as your plates are attached to your car registration. You will need to surrendder your old plates within a timeframe (2 weeks AFAIK). Also pretty sure that you can't reserve any plates.

thats wrong actually.. you cant keep them yourself but you can store them at SAreg as long as you have payed the year infronts money on it.. it doesnt have to be registered to a vehicle

its not restricted to customs either.. been through it not long ago

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5559524
Share on other sites

I really don't know if I can justify another $200/yr on my baby. I guess I could go one of the non-yearly fee ones ...

Could get like JRMS-34 or JENS-34 but then people might think I'm 34yo :P .. hmm .. JEN-R34 would be win, but that would be yearly fee. Gheys.

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5560335
Share on other sites

next chance i get ill just pay a few years in advance, then i can regret it like all the money i spend haha

mines good cos it doesnt apply to one car. eg JRM 34 would be a bit strange on a S15.. RIPP3R goes on anything, that if you plan to keep it for a long period ect

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5560729
Share on other sites

I really don't know if I can justify another $200/yr on my baby. I guess I could go one of the non-yearly fee ones ...

Could get like JRMS-34 or JENS-34 but then people might think I'm 34yo :) .. hmm .. JEN-R34 would be win, but that would be yearly fee. Gheys.

:D what about JENR-34 once off fee

jenr34.png

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5560836
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...