Jump to content
SAU Community

Gps + Vdeo In Motion Solution

Leev_35

By Leev_35,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

Leev_35 Contributor

Leev_35

Posted
Posted (edited)

Hi All,

I have recently done a DIY job to get my Video in Motion going. Using tips from another post I pulled apart the TV tuner and soldered a wire to the C1 circuit on the TV card, I also grounded a wire to the Ground on the circuit board and ran them to the front of the car where I installed a simple $2 switch, when the switch is on, nothing else will display on the screen (apart from whats plugged into the Aux port), when its off the screen acts normally i.e. will only show movies/TV etc when the footbrake is on and you can access all of the inbuilt systems (fuel economy etc).

I previously installed the RCA cable harness provided by Chris Rogers and have an ipod lead popping out of the centre console.

I have a jailbroken iphone 4 running a free App called TVOut2 which basically transmits in real time any image on the iPhone screen to any other screen, TV etc. I also have a purchased Navigon GPS app running on the iPhone.

The TVout program allows you to set which programs operate on portrait or landscape and it also allows you to stretch or shrink the image if need be.

The nav programs drops the music or video volume slightly to give verbal street name directions etc.

You can of course also view any other items on the iphone - internet, youtube, games - whatever you want.

So what I have now is a realtively cheap Navigation system which displays on the stock screen whilst simulatneously being able to play music and videos (when the car is stopped of course :-).

I used the nav system on an iPhone 3g but the GPS was very poor, the iPhone 4 hasnt faltered once.

Just sharing this cheap mod.

If anyone wants more details let me know.

Cheers

Lee

Edited by Leev_35
Link to comment
https://www.sau.com.au/forums/topic/345217-gps-vdeo-in-motion-solution/
Share on other sites
Leev_35 Contributor

Leev_35

Posted
  • Author
Posted
http://www.skylinesaustralia.com/forums/in...t&p=4643222

Here is a photo of the tv tuner board from another post it tells you how to do the above

Hi Guys,

Yes this is the post I used to install the switch from the TV Card. Please note my card was completely different and the point on the card which I soldered the switch to was labelled C1 not Cont1 as in this post.

Also the Ground on my TV card was a screw in the centre of the TV card which was easy to attach the ground wire to.

It was difficult to solder the switch wire onto the C1 point, probably because a. I am useless at soldering and b. because the guage of wire I bought was too thick.

Also I nee to point out when you start the car you need to turn the switch off and then press the TV button then turn the switch on again. If you dont you get the image but no sound.

I am loving this mod though and I find the GPS on the iPhone better than my Tom Tom plus the Mrs. loves watching movies whilst I concentrate on the road.

Cheers

Lee

Leev_35 Contributor

Leev_35

Posted
  • Author
Posted
just quick q, how long did it take you to set it all up?

Hi Mate,

Well I already had the Aux cable from Chris and the iPhone RCA cable.

About 20 minutes to pull apart the TV box and solder the wires.

Already had the iPhone Jailbroken and necessary App installed.

With the fiddling to put everything back together and run the cables maybe an hour and a half all up. Apart from Chris Rogers Aux cable all other materials cost me about $5.

Cheers

Lee

Ozeraser Explorer

Ozeraser

Posted
Posted
Thanks mate. Got the Apps you mentioned and tried it in the V36. It works but screen is black n white, and it could be sharper.

Definitely a cheap option.

Black and white is because your in PAL mode change to NTSC

Leev_35 Contributor

Leev_35

Posted
  • Author
Posted
Black and white is because your in PAL mode change to NTSC

Hi there,

It would definatlely be the NTSC/PAL issue. In options under ipod there is a video out setting, just change this.

I did the same thing initially and thought my screen was shot.

The picture I get now is very crisp dependant on the actual resolution of the source image.

Cheers

Lee

scarf Proficient

scarf

Posted
Posted
Hi there,

It would definatlely be the NTSC/PAL issue. In options under ipod there is a video out setting, just change this.

I did the same thing initially and thought my screen was shot.

The picture I get now is very crisp dependant on the actual resolution of the source image.

Cheers

Lee

Seriuosly where would I be without you guys :rofl2: Thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...