Jump to content
SAU Community

Recommended Posts

A few things for sale that have been sitting in the garage since upgrades.

all part are located on the central coast NSW and can be picked up or listed prices are plus delivery

HKS2835 ProS turbo, done approx 15,000Ks, performed with no issues when installed, this was a spare.

comes with exhaust flange for making a dump and a range of new studs, no fin damage at all, has the std HKS actuator. $1500

post-26316-1290990930_thumb.jpgpost-26316-1290990943_thumb.jpg

VH45 throttle body, larger than standard $80

post-26316-1290990981_thumb.jpg

r34 standard Turbo, came off car with 67000Ks, in good condition comes with std oil water lines and elbow - $350

post-26316-1290990994_thumb.jpgpost-26316-1290991012_thumb.jpg

rb25 camcovers - $70

post-26316-1290990959_thumb.jpg

Braided oil & water lines, the return water line has a fitting to fit onto a barb or pipe end for easy install

never used, come with a few adapters to fit different turbos. - $90

Pink labelled r33 Series 2 AFM, replaced due to upgrade - $90

r33 Series 2 Fuel pump, replaced due to upgrade - $70

r33 Series 2 boost solenoid - $40

2x -12 threaded weld on fittings - 2 sets one steel one alloy - $20 per set unused

2x -12 braided line fittings to fit rb25 cam covers - bought from Tuffrx3 on these forums - $40 unused

2x 1m lengths of rubber hose 3-4mm, unused - $7 each

r33 series 2 std turbo, blown front bearing, good for hiflow comes with oil and water lines and elbow - $60

2 silicon and 1 rubber hose joiners, used one from std throttle body the other two std intercooler pipe size $4 each

post-26316-1290991284_thumb.jpg

rb25 series 2 std intake manifold and top and bottom, removed for upgrade - $130

r33 series 2 std SMIC includes all piping - $50

r33 short shifter kit, bought from ebay never attempted install - $25

possible swap parts in good condition

r33 series 2 drivers door console panel no switches

r33 series 2 horns

r33 series 2 boot plastic that goes over latch area

Edited by 75coupe
Link to comment
https://www.sau.com.au/forums/topic/345897-r33-series-parts/
Share on other sites

Interested in the standard 34 turbo and the 33 SMIC/piping. They're a t3 flange and would fit a standard 33 turbo manifold yes? Have to do some digging but definately interested...

Edited by blk94r33

Cheers mate. Did some searching and from what I can tell despite some slight differences it'll fit as it's T3 flange. Keen on the turbo and accessories and SMIC. Sending you a PM now...

Ive also got:

3" mild steel front pipe, from stock turbo to cat - $80

6 std injectors from a R33 series 2, removed for upgrade - $150

r34 turbo and SMIC sold pending payment

Hey mate. Posted a reply in my WTB thread, have been away from the computer since thursday so haven't got my PM's from you (but have received the email notifications). Will get back to you ASAP once the PM system is up and running again!

Hi,

I'm interested in the turbo, suitable water and oil lines, and the short shifter kit

Are you happy to post to Helensvale, Gold Coast, QLD 4212? I don't post stuff ever, so I have no idea how much that would cost?

Can you tell me a bit more about the turbo? EG: why was it only on for 15,000km's, was it ever dyno'ed, if so, what power figure? What size exhaust housing is it?

hey mate, where you located?

interested in fuel pump, how many k's?

Fuel pump was removed at 95,000Ks.

located on Central Coast NSW

Edited by 75coupe

Hi,

I'm interested in the turbo, suitable water and oil lines, and the short shifter kit

Are you happy to post to Helensvale, Gold Coast, QLD 4212? I don't post stuff ever, so I have no idea how much that would cost?

Can you tell me a bit more about the turbo? EG: why was it only on for 15,000km's, was it ever dyno'ed, if so, what power figure? What size exhaust housing is it?

std r34 turbo sold, I do have a blown r33 turbo (front bearing stuffed) and std water and oil lines...

short shifter kit available $13 postage to 4212.

The HKS 2835 was removed to be replaced for power upgrade, I never saw the dyno figures off that exact turbo but another HKS2835 same spec Ive just finished installing achieved 289.3rwkw, using the std exhaust housing .68.

and I have unused braided lines that can go with it as well as an exhaust flange, its not a laser cut flange, its been hand made with wastegate flap clearance taken into consideration. $23 postage to 4212

hey mate, im keen for the front/dump pipe. check postage to 2327 or i can do a trip down the freeway over the weekend if thats ok.

Edited by hobo-phil

I'll need to check measurements of it tonight for postage quote, hopefully its under 105cm long , otherwise weekend pickup would be fine with me, located at Blue Haven fuel would most probably be cheaper than delivery Im guessin from your area.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...