Jump to content
SAU Community

Recommended Posts

100k service kit I don't have the car anymore so no longer required: rb25det neo water pump, gates timing belt, tensioner bearing, idler bearing, 3x Ancillary belts

post-47337-0-94923400-1291524979_thumb.jpgpost-47337-0-36269200-1291525011_thumb.jpgpost-47337-0-72578400-1291525052_thumb.jpgpost-47337-0-98687800-1291525128_thumb.jpg

$470

Cold air box for R34 Gtt I belive it fits R33 too only trial fitted

post-47337-0-28332500-1291526767_thumb.jpg

$90

R34 A'pillar pod few marks

post-47337-0-70179100-1291526731_thumb.jpg

$60

R34 manual steering wheel suit re-trim

post-47337-0-07718200-1291526698_thumb.jpg

$40

All parts located in Adelaide would prefer pick up but will post at buyers expense.

Pm me or sms me on 0433348748 for further info..

Guessing you don't wanna split any of the parts? gates timing belt & tensioner bearing, specifically?

Also - do you have the airbag for the steering wheel?

Also - do you have the airbag for the steering wheel?

No air bag just the wheel

the r34 @ kudos motorsports.. http://www.kudosmoto...6dett-p-51.html

they only asking like 420

The kit in the link is for a GTR, Their kit for the Gtt starts at $498 plus $77 for the Ancillary belts

ill take the wheel.

pm me your number ill pick it up

cheeers

pm'd

  • 3 weeks later...

Guessing you don't wanna split any of the parts? gates timing belt & tensioner bearing, specifically?

Didn't get a reply last time - so, asking yet again.

  • 3 weeks later...

Bit late now - I gave up trying to find anyone who wanted to split out the timing belt from the 2-3 people trying to sell kits. I just went straight to Kudos and bought one direct, arrived last week.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...