Jump to content
SAU Community

Recommended Posts

hi guys, its my 1st post so sorry if this looks a lil rough around the edges...

Over the weekend i just became the proud owner of a very straight and tidy manual '95 R33 gts25t series II SEDAN with next to no mods apart from an apexi filter, 3" cat back zorst, and coilovers on 18's. bought it for 10G's which i know is a bit pricey i spoze but the fact that it has only done a tad over 60,000 on the clock made me justfiy the spend...

but wihout digressing too much, i noticed only today that in the drivers area are these 2 "LEG PAD thingys" that the outside of my knees are always resting on...1 is on the drivers door located just above the speaker, and the other is bolted to the center console at about the same height as the head-deck...

i have seen a few R33's (mainly coupes) but none of them have had these... so i guess my question is-what are they, and what is their use? im not a small guy by any measure so theyre sorta annoying as i feel a bit squashed-ive pulled one of them off to see if they were stuck there by someone other than the factory but sure enough, when i looked @ the back they had nissan stamped all over them. i rang the guy i bought it off and he said he had no idea but he did state that when he brought it over from japan, the car cost him a little extra compared to other R33's because apparently it had nearly every extra factory mod that was available for this model...from ABS brakes to a FLARE GUN (no bull-it sits under the glove box still)-maybe those were just an added accessory?-dunno-thoughts anyone?

ill post some pics ASAP as im @ work at the moment and will get around to it the moment i get home...

cheers peeps...

PS: looking for West Aussie skyline sedan owners to hook up with, as everywhere i look so far is 2door 2dr 2d......-cheers.

Link to comment
https://www.sau.com.au/forums/topic/346737-r33-drivers-side-leg-pad-thingys/
Share on other sites

It's not a flare gun, it's just a road flare, pretty sure it's a legal requirement to carry one in Japan.

Not sure about Australia, but when they're imported into the UK, Customs are supposed to remove them when they inspect the car.

No idea about the leg pad thingies. I'd imagine they're just to rest your knee on, but were designed for tiny Japanese salaryman rather than a hulking great Australian.

The leg pads are a factory option, they have been around since the R32 and are available for all skyline models from there on in and I believe stageas as well.

I have them in my R33 GTR too... I didn't likethgem at first but got used to them... :)

The leg pads are a factory option, they have been around since the R32 and are available for all skyline models from there on in and I believe stageas as well.

I have them in my R33 GTR too... I didn't likethgem at first but got used to them... :)

as you can see ive got the left leg one off no problem but i cant see any screw holes for the right leg, have you attempted taking this one off yourself?-it looks like it might be stuck there with just an adhesive so im not sure if i want to just rip it off fearing it might take some of the panel with it-i cant see myself getting used to it any time soon so would like to get it off...im hoping it has reverse screws that i can see if i take the whole door panel off otherwise-RIIIIIPPPPPP!!!

  • 1 month later...

Ha ha. You learn something new everyday!!

I've got an R33 4 door with those clips under the dash. Thought it must be for a fire ext or torch. Flares??

Far out ! That's cool. How much to buy one??

Never seen those pad dealies either. Crazy Little People.:ninja:

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...