Jump to content
SAU Community

Recommended Posts

Type B Poncams (new)

BNR32/BCNR33 (RB26DETT) - Duration: IN 260, EX 260 Lift: IN,EX 9.15mm

$650 + postage

Garret -5 turbos

Only done dyno kms

$2000 + postage

Defi triple din with new sensors (new)

$500 + postage

Greddy Profec B-spec 2 (used)

$300 + postage

Oil cooler and relocation kit (new)

Core is PWR and is 21 row and the relocation is brand new greddy

$600 + postage

Vega HID kit (new)

It's from NYTSKYs group buy ages ago, never wanted to use them so just been sitting around

They are 35w H1 bulb in 6000k

Picture is shit sorry, camera didn't like taking pictures of them :)

$100 + postage

Tomei dumps and HKS split front pipe (new)

For 33 and I guess 32

Brand new, very shiny.

$800 each or $1500 for both + postage

Delphi fj10455 injectors rated at 750 cc x 6 (new)

$400 + postage

If I've left out any information just send me a PM and I'll get back asap, all items located in NSW.

post-35543-0-41287900-1291791319_thumb.jpg

post-35543-0-52263800-1291791491_thumb.jpg

post-35543-0-75902600-1291791664_thumb.jpg

post-35543-0-50287200-1291791939_thumb.jpg

post-35543-0-54273700-1291792220_thumb.jpg

post-35543-0-00517500-1291792659_thumb.jpg

post-35543-0-81748900-1291792667_thumb.jpg

post-35543-0-17101000-1291792878_thumb.jpg

post-35543-0-33136200-1291792977_thumb.jpg

post-35543-0-21332500-1291792985_thumb.jpg

post-35543-0-07436500-1291794196_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/346895-gtr-parts/
Share on other sites

  • 2 weeks later...

Type B Poncams (new)

BNR32/BCNR33 (RB26DETT) - Duration: IN 260, EX 260 Lift: IN,EX 9.15mm

$650 + postage

$600 pp

Garret -5 turbos

Only done dyno kms

$2000 + postage

$1900 pp

Defi triple din with new sensors (new)

$500 + postage

SOLD

Greddy Profec B-spec 2 (used)

$300 pp

Oil cooler and relocation kit (new)

Core is PWR and is 21 row and the relocation is brand new greddy

$600 + postage

$300 for the core pp

$250 for relocation kit pp

or $500 for both pp

Vega HID kit (new)

It's from NYTSKYs group buy ages ago, never wanted to use them so just been sitting around

They are 35w H1 bulb in 6000k

Picture is shit sorry, camera didn't like taking pictures of them :)

$100 + postage

Tomei dumps and HKS split front pipe (new)

For 33 and I guess 32

Brand new, very shiny.

$800 each or $1500 for both + postage

$700 each pp

or $1300 for both pp

Delphi fj10455 injectors rated at 750 cc x 6 (new)

$400 + postage

$350 pp

Plus I also have a apexi PFC PRO for 33gtr with 2 z32 afms (bosch) no adapters.

$1100 for the PFC alone or $1300 with z32s.

Z32s $250 on their own + postage

Link to comment
https://www.sau.com.au/forums/topic/346895-gtr-parts/#findComment-5602795
Share on other sites

Greddy Profec B-spec 2 (used)

$300 pp

Oil cooler and relocation kit (new)

Core is PWR and is 21 row and the relocation is brand new greddy

$300 for the core pp

$250 for relocation kit pp

or $500 for both pp

Vega HID kit (new)

It's from NYTSKYs group buy ages ago, never wanted to use them so just been sitting around

They are 35w H1 bulb in 6000k

Picture is shit sorry, camera didn't like taking pictures of them

$100 pp

Tomei dumps and HKS split front pipe (new)

For 33 and I guess 32

Brand new, very shiny.

$700 each + postage

or $1300 + postage

Delphi fj10455 injectors rated at 750 cc x 6 (new)

$350 pp

Plus I also have a apexi PFC PRO for 33gtr with hand controller.

$1100 pp

Type B Poncams (new)

BNR32/BCNR33 (RB26DETT) - Duration: IN 260, EX 260 Lift: IN,EX 9.15mm

$650 + postage

$600 pp SOLD

Garret -5 turbos

Only done dyno kms

$2000 + postage

$1900 pp SOLD

Defi triple din with new sensors (new)

$500 + postage

SOLD

Z32s $250 on their own + postage SOLD

Link to comment
https://www.sau.com.au/forums/topic/346895-gtr-parts/#findComment-5610679
Share on other sites

  • 2 weeks later...

Greddy Profec B-spec 2 (used)

$300 pp

Vega HID kit (new)

It's from NYTSKYs group buy ages ago, never wanted to use them so just been sitting around

They are 35w H1 bulb in 6000k

Picture is shit sorry, camera didn't like taking pictures of them

$80 pp

Tomei dumps and HKS split front pipe (new)

For 33 and I guess 32

Brand new, very shiny.

$700 each + postage

or $1300 + postage

Delphi fj10455 injectors rated at 750 cc x 6 (new)

$350 pp

Plus I also have a apexi PFC PRO for 33gtr with hand controller.

$1000 pp

Type B Poncams (new)

BNR32/BCNR33 (RB26DETT) - Duration: IN 260, EX 260 Lift: IN,EX 9.15mm

$650 + postage

$600 pp SOLD

Garret -5 turbos

Only done dyno kms

$2000 + postage

$1900 pp SOLD

Defi triple din with new sensors (new)

$500 + postage

SOLD

Z32s $250 on their own + postage SOLD

Oil cooler and relocation kit (new)

Core is PWR and is 21 row and the relocation is brand new greddy

$300 for the core pp

$250 for relocation kit pp

or $500 for both pp

Link to comment
https://www.sau.com.au/forums/topic/346895-gtr-parts/#findComment-5626055
Share on other sites

  • 2 weeks later...
Boost controller and injectors gone, only PFC front pipe and HID kit remain

Hi Adrian, does The Power FC PRO for the R33 GTR have the launch control feature? (rev limiter) and the ignition cut feature?

If it has I might sell mine and buy yours.

Is the Power FC running the PRO Software and do you know what version it is (version 1 or version 2)

Cheers, Chris

Link to comment
https://www.sau.com.au/forums/topic/346895-gtr-parts/#findComment-5661755
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...