Jump to content
SAU Community

Recommended Posts

Looking at a second hand r34 gtr that had a Fuel air controller installed and I was wondering if they are a bad thing for engine life. I would think that most GTR's would have had some mods done to them so was just wondering if I should expect some extra engine wear because of it, and what things I might need to have checked etc. Thanks if anyone has any advice.

By air/fuel controller are you referring to piggybacks? (Apexi SAFC is an example). As for engine life? If they are poorly configured/tuned then yes.. standalone ECU is always the best option, but not the cheapest.

By air/fuel controller are you referring to piggybacks? (Apexi SAFC is an example). As for engine life? If they are poorly configured/tuned then yes.. standalone ECU is always the best option, but not the cheapest.

Yes I think so, but I only had a picture to go pre compliance and its since been removed before it was available for inspection. I could only go on what the salesman told me. I will attach a picture if anyone could confirm that it is an air/fuel controller.

post-78962-0-94382300-1291952307_thumb.jpg

that looks like a HKS EVC, which is a boost controller

i dont think HKS make piggyback AFC's that look like the EVC model

Yep just googled HKS EVC and its a splitting image for the HKS EVC 4 boost controller, I guess the salesman would prefer I didn't know that. Jeez its hard to find an honest used car salesman. No wonder he said it won't be going back on after compliance work seeing how much it is worth. Thanks for spotting that paul

technically speaking a car can't be complianced with aftermarket mods (has to be returned to stock), and any aftermarket parts aren't allowed to be reinstalled after the compliance. don't think they are allowed to even sell them (although a lot do). i could be wrong though.

  • Like 1

technically speaking a car can't be complianced with aftermarket mods (has to be returned to stock), and any aftermarket parts aren't allowed to be reinstalled after the compliance. don't think they are allowed to even sell them (although a lot do). i could be wrong though.

Yes that makes sense, don't know why he lied about it being something else though.

Fairly new to all of this so I guess I should ask is there anything I need to make sure of when they took it out, something capped off, modified ecu, missing sensors or something like that or is it a fairly straight foward thing to install and then remove.

EDIT: I found a diagram showing how its all connected and it looks like the only area I need to worry about is the wastegate. Seems that the HKS EVC is one of the better ones so I am hoping that the engine won't have suffered too much from the overboosting.Thanks everyone for your help as its going to be a steep learning curve for me.

Edited by thatlbeme

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...