Jump to content
SAU Community

Recommended Posts

Location: Blacktown area

Item 1:

Tein Type Flex

done Approx 10,000km

Good condition no leaks

$1800

Item 2:

PFC + controller

Near new Condition

$1100

Item 3:

Work meister SP1 With Bridgestone RE001 (Black center with polish lip)

17 x 9 10+

Good condition

Plenty of Tread on the tyres approx 80%

$3200

Item 4:

Blitz Nur Spec R Catback Exhaust

used for couple of month

Light scrape marks

$600

Item 5:

Cusco Front and Rear Strut Bars

$150 each or $250 for both

Edited by TerryL
Link to comment
https://www.sau.com.au/forums/topic/347196-s-y-d-r32-gtr-parts/
Share on other sites

Blitz Exhaust and Cusco Strut Braces SOLD ! - pending payment confirmation by TerryL :closedeyes:

As for the Tiens Flex - get amoungst em GTR folks.They're awsomely newish!

Free B U M P

Blitz Exhaust and Cusco Strut Braces SOLD ! - pending payment confirmation by TerryL :closedeyes:

As for the Tiens Flex - get amoungst em GTR folks.They're awsomely newish!

Free B U M P

As what Sinista said they sold :yes:

spring rates on the teins and have they been re-valved for aussie roads?

I dontknow what the springs rates are..

there is some writing on the spring so i'll have a look later

And no i dont think they been re-value

but the ride is pretty damn awesome on the streets

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...