Jump to content
SAU Community

Recommended Posts

Got a letter today for a vehicle inspection notice, says its for noise control.

Any idea to find out how i was seen in the first place ect.

The car is loud, says it has to be under 90db at 4800 revs. any way i can check at my own mechanic first at all?

Would be best bet to just switch over to stock exhaust for inspection? is there much involved, Im using the one it came from japan with.

Link to comment
https://www.sau.com.au/forums/topic/347433-letter-from-deccw/
Share on other sites

does it say exhaust noise and emissions control systems? or just noise? DECCW always want to see that your standard emissions control systems are in place (exhaust, intake, bov, intercooler, charcoal canister).

do you have to take it to a certain place that they have listed? any chance of showing the form they sent you?

i recently had to go through the same thing.

k for deccw u need 2 have it quite and all emissions gear on, such as stock bov, stock side mount cooler, stock air box, stock turbo if u have an aftermaket one, stock computer, charcoal canister

I have been there and done it myself and got a few of mates cars ready for it is well

You did say R33 NA, right? That will half your problems right there - no BOV, intercooler or turbo to worry about!

Get another muffler fitted, get the exhaust shop to test it before you hand any money over (make sure you've let them know what you want when you leave it with them, obviously) and take it for the inspection or whatever they've asked you to do.

dont bother with the extra muffler. ive got a way to get it to pass. my exhaust went from 96db (completely stock exhaust) to 82db with my little 'mod'. PM me and i'll guide you through it or even give you my one.

also make sure you have a standard cat and DONT go to the guy in granville. ive heard lots of crappy stories about what he thinks a stock cat is. the guy in campbelltown actually knows what hes doing and isnt after your $.

does it say exhaust noise and emissions control systems? or just noise? DECCW always want to see that your standard emissions control systems are in place (exhaust, intake, bov, intercooler, charcoal canister).

do you have to take it to a certain place that they have listed? any chance of showing the form they sent you?

i recently had to go through the same thing.

Car is NA and the only mod is the Exhaust. its got a Cat, and a new muffler, still quite loud tho. Not testing for emissions, Just has to be under 90DB at 4800 RPM.

Yes i have a listed place their approved workshops. il gets some pics of the form up asap.

they dont check for those things mate, you can easily hide it. they dont take your exhaust apart to check.

the pics i sent you in the PM explain what to do. just dont tell them what you did.

you also need a STANDARD cat. it can not be aftermarket. the exhaust can be any brand you like as long as it passes the noise test.

thats just what they ask for when you do the inspection.

you can go to the inspection with whatever gear you want. but you will be sent a defective vehicle notice if it doesnt meet their requirements (all stock items fitted). but when you receive the defective vehicle notice you can go to the IM240 test and pass that with whatever gear you want fitted.

They have an "Anti Tempering" section to pass by the looks of it, A baffle in the joint sounds a bit dicey. care to explain?

Get a peice of metal, cut it out the same shape as the flange at the cat end of the catback. Then drill holes in the middle that mean you have effectively blocked half your exhaust. This means you have bad flow, hence bad power and bad flow in the form of a restriction which leads to big drops in noise :)

Very very cheap nasty way of solving the problem.

thats just what they ask for when you do the inspection.

you can go to the inspection with whatever gear you want. but you will be sent a defective vehicle notice if it doesnt meet their requirements (all stock items fitted). but when you receive the defective vehicle notice you can go to the IM240 test and pass that with whatever gear you want fitted.

And that is it? Car passed?

Get a peice of metal, cut it out the same shape as the flange at the cat end of the catback. Then drill holes in the middle that mean you have effectively blocked half your exhaust. This means you have bad flow, hence bad power and bad flow in the form of a restriction which leads to big drops in noise :)

Very very cheap nasty way of solving the problem.

Thats my best bet at the moment, going in the the local exhaust shop for a noise test. $30. Will have a chat to him about the making up the metal piece behind the flange.

Cheers. il let you all know how i go.

Ive been DECC 3 times already for "noise" pollution and all 3 times have gone to that "granville guy" and passed. Its not difficult, trust me on this one.

lol why would you go through the trouble of fabricating pieces thats going to take you a couple of hours to make and fit when you can just go borrow a standard exhaust and slap the thing on in 30 mins. Much easier, simpler and a GUARANTEED pass. Its a N/A car after all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...