Jump to content
SAU Community

Recommended Posts

hi guys,

im stuck & need advice...i am not happy with my r32gtr shell so im pulling all of my running gear out of it & tossing the shell - more than likely will keep the engine as it owes me 25k & probably sell the interior, diff etc.

i am on the search & here are my 2 options (both are at similar price point):

1. red 94 r32gtr: forged bottom end, -5's, nismo wheels

OR

2. white 94 r32gtr vspec2: stock bottom end, -7's, volk wheels

which would be a better buy? i can see that i'd make more money from selling the forged engine etc on the red gtr, however, the vspec2 is more of an icon & better for resale i guess...what are your thoughts? this is doing my head in ARRRRGH :)

i can also say that the red gtr is cleaner, but the white gtr just needs a bit of tlc to have it look as nice

regards

marko

i put together a quick analysis & after selling parts i'd naturally get a lot more back with the red gtr...the difference is over 5k

from this, it will cost me an additional 5k to have a vspec2 which doesn't sound too bad really...

VS2 and how good are you at haggling? VINs noted and Checked for rust?

BTW, how do you know that the 2 owners aren't on SAU (assuming these are already in Oz)? If they are, they'll vote for their own car eh? :P

hi all,

i had the white vspec2 inspected a few days ago, the chassis rails & sills are badly pushed in...can these be repaired or should i stay clear?

also has rust under the n1 boot lid (on the actual boot lid itself, rust straight thru), under the passenger mirror in the door sill itself, rear 1/4 guard arch & the bonnet paint is lifting off the alloy bonnet near the n1 front lip, wtf!

i also looked at the red gtr (non vspec) & the condition is incredible - very nice indeed :) reminds me of my aust delivered gtr which i had a few yrs back

Yes chassis rails can be repaired depending on how badly damaged they are. The can also be replaced but both repairing and replacing is a big job. I think your better off going with the normal GTR for the same price cause if you get the V-spec its going to cost a fair bit of coin to get it all fixed up to a standard that your happy with the car

  • 3 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...