Jump to content
SAU Community

Recommended Posts

hi guys,

im stuck & need advice...i am not happy with my r32gtr shell so im pulling all of my running gear out of it & tossing the shell - more than likely will keep the engine as it owes me 25k & probably sell the interior, diff etc.

i am on the search & here are my 2 options (both are at similar price point):

1. red 94 r32gtr: forged bottom end, -5's, nismo wheels

OR

2. white 94 r32gtr vspec2: stock bottom end, -7's, volk wheels

which would be a better buy? i can see that i'd make more money from selling the forged engine etc on the red gtr, however, the vspec2 is more of an icon & better for resale i guess...what are your thoughts? this is doing my head in ARRRRGH :)

i can also say that the red gtr is cleaner, but the white gtr just needs a bit of tlc to have it look as nice

regards

marko

i put together a quick analysis & after selling parts i'd naturally get a lot more back with the red gtr...the difference is over 5k

from this, it will cost me an additional 5k to have a vspec2 which doesn't sound too bad really...

VS2 and how good are you at haggling? VINs noted and Checked for rust?

BTW, how do you know that the 2 owners aren't on SAU (assuming these are already in Oz)? If they are, they'll vote for their own car eh? :P

hi all,

i had the white vspec2 inspected a few days ago, the chassis rails & sills are badly pushed in...can these be repaired or should i stay clear?

also has rust under the n1 boot lid (on the actual boot lid itself, rust straight thru), under the passenger mirror in the door sill itself, rear 1/4 guard arch & the bonnet paint is lifting off the alloy bonnet near the n1 front lip, wtf!

i also looked at the red gtr (non vspec) & the condition is incredible - very nice indeed :) reminds me of my aust delivered gtr which i had a few yrs back

Yes chassis rails can be repaired depending on how badly damaged they are. The can also be replaced but both repairing and replacing is a big job. I think your better off going with the normal GTR for the same price cause if you get the V-spec its going to cost a fair bit of coin to get it all fixed up to a standard that your happy with the car

  • 3 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...