Jump to content
SAU Community

Rb20 Power Fc + Rb25Det Longblock + R32Gtr Box

Tweek
 Share

Recommended Posts

Tweek Apprentice

Tweek

Posted
Posted

As the title says I have a genuine rb20det AP Engineering Power fc with hand controller. Still looks brand new. Im sure you all know what they look like. Was running an rb25 but

selling as im now running a 26. Even comes with original AP Engineering sticker ( must be worth a few extra killowatts) and instruction manuals.(in Japanese). Looking for

$1200

Also selling an rb25det long block. just head and block as per pics except turbo. Perfect for someone with a blown motor. Just bolt your good stuff on Missing flywheel, intake manifold and turbo. Was running

a lowmount gt35r. Less than 100000kms. New gates timing belt and timing gear. Also has a new genuine nissan waterpump. Running perfect before removal. Only removed because they are ugly and rb26

motors look so much better. Quick note, its missing quite a few camcover screws and its using an rb20 harmonic balancer.. Looking for $600.

R32 GTR Gearbox. Looks like every other r32 gtr gearbox. Left over from half cut with 106xxxkms. Seems to work well. Looking for $500.

All items are located in Orange NSW. For anyone Interested I will be picking up some things in Sydney on Saterday and could deliver anything then. Other than that, free shipping on Power FC if need be and I would prefer pickup on the other two.

Throw me a PM or call me on 0411217399

Cheers, Josh.......

post-38929-0-24071900-1292323207_thumb.jpg post-38929-0-21052200-1292323236_thumb.jpg post-38929-0-96994600-1292323262_thumb.jpg

Tweek Apprentice

Tweek

Posted
  • Author
Posted

If any one wants this stuff Delivered to sydney on saterday, I need to know by tomorow.

Also, for anyone interested in the power FC Ive got an almost brand new z32 airflow meter Ill chuck in too.

cheers, Josh...............

  • 2 weeks later...
W0rp3D Grand Master

W0rp3D

Posted
Posted

If any one wants this stuff Delivered to sydney on saterday, I need to know by tomorow.

Also, for anyone interested in the power FC Ive got an almost brand new z32 airflow meter Ill chuck in too.

cheers, Josh...............

How much for the z32 on its own?

  • 4 weeks later...
  • 4 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      Yea that's a fair assumption. I'm presuming they call them solid lifters as they have no moving parts like hydro lifters. 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I believe you're confusing WMI with water injection. Looking at that graph, the 93aki+WMI car is making more power than C16 race gas. Boost juice, which is what I also run, is Snow Performances 50/50 premix. 
    • joshuaho96
      "Cheap" bolt on turbo on RB25DET NEO

      By joshuaho96 · Posted

      GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • GTSBoy
      "Cheap" bolt on turbo on RB25DET NEO

      By GTSBoy · Posted

      I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
×
×
  • Create New...