Jump to content
SAU Community

Help>>>> Rb25Det Missing

1R332OWN

By 1R332OWN,
in Engines & Forced Induction

 Share

Recommended Posts

1R332OWN Apprentice

1R332OWN

Posted
Posted

hey guys, just wondering if there is someone out there that could give me a bit of advice. i have just recently purchased a s/s turbo manifold for my rb25 as i have put it on (with new manifold gasket) it seems to have a slight leak coming out of it. i started the car and the boost gauge will not boost but the vaccume is still working all intercooler piping is on correctly as far as i can see. it has a slight crack and bang and want rev until half throttle and is really dull, im thinking maybe i have a piping on the wrong way around or missed a breather hose of somewhere as i would say its something to do with A and F ratio as its a blue fuely smoke coming out the exaust possibly or maybe coilpacks have shit them selves im not to sure . appreciate and help cheers tried to explain it the best i could. car is standard and still only th SMIC is on the vehicle was runninng finr before i pulled it apart.

cheers leigh :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/347572-help-rb25det-missing/
Share on other sites
1R332OWN Apprentice

1R332OWN

Posted
  • Author
Posted

thanks for everyones help very appreciated i not long ago wased the engine bay and i took coil packs off last night to check and the spark plugs were literally under water.... haha dickhead mistake want be doing that again. cheers :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Howdy Y'all

      By soviet_merlin · Posted

      Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      What Duncan said sounds right. Also, it looks like they only have the driver's mat. Not the rest. Because looking at the diagram: KG4911 is just the mat for the driver. KG4900 is the full set if I'm not mistaken and discontinued.   But, it looks like they may still have the full set for the manual S2. Might be worth checking for the other models as well as they seem slightly different. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/misc/G49 Man, I'm tempted.
    • GTSBoy
      WGNC34 - floor mats

      By GTSBoy · Posted

      I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • MBS206
      R34 Skyline climate control unit transistor

      By MBS206 · Posted

      Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
×
×
  • Create New...