Jump to content
SAU Community

Recommended Posts

From what I recall there might be one early next year. More than likely if Steve-o (N1GTR) is president again next year. It will most likely be a charity cruise aswell.

These were just ideas tossed around on the last social cruise (31st Oct).

Maybe someone can shed more light on this, I'd be pretty keen for it. Never been to Putty Rd before.

Link to comment
https://www.sau.com.au/forums/topic/347755-putty-rd-cruise/#findComment-5594299
Share on other sites

Peoples, as far as I know there's no plans for an official SAU-NSW Putty Road cruise as yet, but there's nothing stopping you from setting up a cruise yourselves and making it happen.

As long as everyone on the cruise behaves themselves and doesn't bring disrepute to the club, go out there and enjoy yourselves! Just make sure none of you do anything stupid, it is a public road after all.

Even better: bring your car along to one of the skid-pan or track days we'll be running in the new year - that way you KNOW you won't be risking your licence or people's lives! Check the calendar for details.

Link to comment
https://www.sau.com.au/forums/topic/347755-putty-rd-cruise/#findComment-5595196
Share on other sites

Sorry Nick, there is plans for the next club cruise to go up there, early next year, from Windsor to the pub and back

Guys I'll put the date up and details up asap but right now I'm working on securing texi dates, a drag day, wakefields, skyline nationals....

Link to comment
https://www.sau.com.au/forums/topic/347755-putty-rd-cruise/#findComment-5595622
Share on other sites

Stevos doing all the texi stuff, I'll be doing putty road, and thread will be up after christmas but before NYE.

I'm just too busy ATM to get it all planned as my spare time still has me running around to do work stuff as I'm going on leave first week of Jan!

Link to comment
https://www.sau.com.au/forums/topic/347755-putty-rd-cruise/#findComment-5596879
Share on other sites

Here's a link to the thread: http://www.skylinesaustralia.com/forums/topic/348279-s-a-u-n-s-w-putty-road-cruise/

Please keep chat in that section to a minimum unless it's in regards to the event itself... :D

Link to comment
https://www.sau.com.au/forums/topic/347755-putty-rd-cruise/#findComment-5601260
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...